LumberJocks Woodworking Forum banner

my air filtration system

2K views 1 reply 2 participants last post by  ScottN 
#1 · (Edited by Moderator)
Here's my air filtration system. It's been in place for a while, but I thought I'd share it since the topic comes up from time to time. It is comprised of six 12" x 24" filters arranged on a frame. It is driven by a 24" fan that I had left over from another project. The fan runs at three speeds, the highest is about 6000cfm. It provides a lot of filtration area, 12" x 24" x 6 = 1728 sq inches.
Fixture Building Building material House Wood

It hangs from the ceiling. Draws air in through the six filters and exhausts through openings on the front and rear. I put in a toggle switch for easy on/off.
Here's some of the build:
Wood Composite material Building material Metal Hardwood

Wood Naval architecture Water Building material Hardwood

Building Wood Building material Flooring Hardwood

Building Wood Flooring Floor Hardwood

I use some of the higher-grade filters and clean them off outside when needed.
 

Attachments

See less See more
10
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top