LumberJocks

Looking for Table Saw cast iron wings and a set of legs

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by Ebald posted 970 days ago 2155 views 1 time favorited 8 replies Add to Favorites Watch
View Ebald's profile

Ebald

11 posts in 970 days


970 days ago

I just picked up an older Jet contractors saw. Blue green in color. I need a set of legs as the set that came with it have been cut down to make the saw shorter. I’ve seen the white Jet legs and I think they would fit just fiine.
It is also missing a cast iron wing. 10” X 27” that mounts with 3 bolts.
Anybody got any of these out there?
Powermatic, Delta and other brands of contractors saws may fit.
Im in central OH
Plus these parts could be shipped UPS.
Thanks!!


8 replies so far

View jeter's profile

jeter

20 posts in 1192 days


#1 posted 970 days ago

I have one from an Craftsman contractor saw, which I’m just getting ready to place an add on ebay. I’m asking $50. Plus shipment. I paid around $90 plus with tax & shipment, you could PM me if you are interested.The size is 12×27

View Ebald's profile

Ebald

11 posts in 970 days


#2 posted 970 days ago

Jeter – Im interested but new to the site so I can’t PM yet. Could I get a picture especially of the underside where the mounting holes are? Hopefully 3 but I can drill if it’s a different pattern.
Thanks!

View Rick  Dennington's profile

Rick Dennington

3274 posts in 1799 days


#3 posted 969 days ago

Why not forget the set of legs and build a saw cabinet ? Also…..instead of replacing the cast iron wings, why not build your left and right outfeed tables out of laminayed MDF? There are a bunch of saw cabinets on here, and different styles to choose from…I re-built my old Craftsman contractor saw this way a good while back, and it works great…..saves on paying for shippin, which will cost a good chunk of change…..take a look at mine, then look on here for others, as well…Building it yourself will save lots of headaches and you’ll appreciate it a lot more knowing that you built it…..... here’s mine…..

-- " I started with nothing, and I've still got most of it left".......

View jeter's profile

jeter

20 posts in 1192 days


#4 posted 968 days ago

Ebald this is what the extension wing hole looks like, so you can get an idea

View MashMaster's profile

MashMaster

92 posts in 1265 days


#5 posted 967 days ago

I have two Jet cast iron wings that I haven’t used yet. I’d be willing to sell it for what I paid for which I can’t remember so I’d have to check. Let me know if you want me to figure out what I paid (I think it was $100 each) of course plus shipping. just let me know if you want to look into it further. The Jet ones have a miter slot cut into it.

-- - Dave ; Austin, TX

View Bertha's profile

Bertha

12951 posts in 1298 days


#6 posted 967 days ago

I’ve got a similar saw and I put a benchdog router table on one side and a blank cast iron plate on the other. Both had to be drilled to fit my table, unfortunately. BEWARE though, it makes the table VERY heavy and with the narrow stand footprint, the saw is liable to tip. I know this because it tipped onto me. It hurt, too. I put a floor anchor into the non-router lighter side and bolted the wing to the floor via a chain and quick disconnect.

-- My dad and I built a 65 chev pick up.I killed trannys in that thing for some reason-Hog

View Ricklesss's profile

Ricklesss

1 post in 918 days


#7 posted 918 days ago

Bertha, great point on being safe with that heavy table. I’m having difficulty finding a cast iron extension wing with out a router insert in it.
Where did you find one? Thanks! RicklesssssS in Oregon

View Ebald's profile

Ebald

11 posts in 970 days


#8 posted 918 days ago

I had several people contact me with wings from various brand saws. Only a few of the holes lined up with my table so I had to drill. It all went very smoothly. Easier than I thought. Now the table is very steady! I love the large cast iron work surface. Very smooth & solid. The table does not vibrate at all nor does it want to tip.
I would post a fresh ad saying your looking for CI wings

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase