LumberJocks

Router Package Special!!! +++SOLD+++

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by paratrooper34 posted 12-04-2011 04:17 AM 1261 views 0 times favorited 4 replies Add to Favorites Watch
View paratrooper34's profile

paratrooper34

760 posts in 1676 days


12-04-2011 04:17 AM

Hey All,

Thanks for everyone’s inquiries, I sold the complete package today on Ebay for a final price of $475. I am posting this info to give anyone who is contemplating buying or selling something similar what a good market price is.

I am getting rid of my next power tool; one that I do not use. I bought this setup new just over two years ago and used it maybe 7 – 8 times. I even built a sweet table for it, but I have to part with this as I just do not use it. My transition to hand tools has pushed this tool to the wayside like the others. This is about the last one to go. I was going to list this on Ebay for a price which is closer to what I have into it, but I am going to see if any of you on here would like it (for a less expensive price than what I will ask for on Ebay). Here is what I have and a description of each piece.

This is for a Milwaukee router with an Incra lift and some accessories.

1 – Milwaukee Model 5625-29 with a 15 Amp 3-1/2-Horsepower motor, Electronic Variable Speed, Feedback Circuitry and Soft-Start. This is a fixed base, variable speed router with 1/2” collet. I did my homework on this router, this is an exceptional piece of equipment. All the power you will need and they have great ratings across the board. It comes with the fixed base you see in the picture, two wrenches for installing and removing bits, a t-handle wrench for adjusting bit height (not pictured, but it will be included), and the owner’s manual. I used this router very little, I would estimate maybe one hour of run time on it. It is not new, but it sure is close as I really did not use this much.

2 – INCRA/Woodpeckers PRL-V2 Lift. This has exactly as much use as the router. I bought them both at the same time and installed them for use at the same time. The top surface has a couple of minor scratches and you can see where I wrote UP/DOWN with a Sharpie near the wheel that raises and lowers the bit. It would not come off, even with carbeurator cleaner. Other than those marks, this lift is in great shape and works exactly as it should. The lift comes the owner’s pamphlet, the lift bar for lowering and raising to change bits, and five different sized throat plates to use for different sized bits.

3 – Incra Gauge. This is used for measuring things, but excels at measuring bit height. I actually bought it used, but it is still nice.

4 – Rockler Router Guide Bushing Kit. I never used it, completely brand new.

5 – MLCS Router Bit Set. I had this set for awhile, longer than my router. Most of the bits are used, but lightly. There is also a large pattern router bit, I used this bit once to cut the hole in my router table for the lift. The bits are not damaged and still sharp.

6 – Rockler 4 Piece Router Fence Kit – I never used it, still brand new.

If you are interested or need more info, please PM me and I will help you out.

I am looking to get $550.00 for this package. This is a fair price considering all of it cost me over $800 when I got them. You pay for shipping, the box weighs 42 lbs. See the pics below. PM me if you want the high res ones.

Next week I will sell my Incra LS Super Fence that I had on the table. Stay Tuned.

-- Mike


4 replies so far

View TrBlu's profile

TrBlu

362 posts in 1350 days


#1 posted 12-04-2011 02:42 PM

If you decide to separate the package, I would be interested in the lift. Any thoughts on what you would need for the Incra-lift system?

Thank you.

-- The more I work with wood the more I recognize only God can make something as beautiful as a tree. I hope my humble attempts at this craft do justice by His masterpiece. -- Tim

View paratrooper34's profile

paratrooper34

760 posts in 1676 days


#2 posted 12-04-2011 02:55 PM

TrBlu, I prefer to sell this as a lot, especially since I just put it on Craigslist also. However, if it doesn’t move as a package, you are first in line for the lift. Thanks for your interest.

-- Mike

View OpaTom's profile

OpaTom

3 posts in 1089 days


#3 posted 12-05-2011 11:25 AM

I may be interested in the rest without the lift, if the prie is right. How much would you want if you split the lift out and sold it to TrBlu?
What do you have in mind for the Incra LS fence? I have a TSII now.
Tom

View paratrooper34's profile

paratrooper34

760 posts in 1676 days


#4 posted 12-05-2011 03:15 PM

Ok, I can do that, no problem. $325 for the router and all the other parts/pieces and $200 for the lift. I want $200 straight up for the LS super System.

Let me know if you guys want to do this.

-- Mike

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase