Grizzly G0715P alignment

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by oksawdust posted 11-01-2011 03:33 AM 1449 views 0 times favorited 2 replies Add to Favorites Watch
View oksawdust's profile


8 posts in 2717 days

11-01-2011 03:33 AM

Topic tags/keywords: tablesaw question resource

Does anybody know if Grizzly has found a solution for the change in blade alignment as the blade lowers?
I finally finished assembling mine and found the poor reviews afterwards. I rechecked mine and sure enough it starts kicking out as the blade lowers. I topped out at 0.028” blade toed out away from fence. I’m sure it gets worse the lower the blade gets, but I couldn’t get an accurate measurement with my DI after 12 turns down from full height.

-- It's not a misplaced hole, I just wanted to use my plug cutter.

2 replies so far

View Simons44's profile


93 posts in 3448 days

#1 posted 11-01-2011 04:47 AM

When did you buy your saw? I just checked mine (again) and I don’t have that problem. I pre-ordered mine and it was delivered a year next week.

View TopamaxSurvivor's profile


18286 posts in 3700 days

#2 posted 11-01-2011 08:24 AM

Sounds like a good reason to send it back where it came from. Friends working at a local manufacturing company of high profile, very expensive machines tell me many of the global partners have a very difficult time maintaining any reasonable tolerances in their manufacturing processes.

-- Bob in WW ~ "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics