Just in case an 8" Jointer is too small for you..

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by superstretch posted 1034 days ago 1192 views 0 times favorited 9 replies Add to Favorites Watch
View superstretch's profile


1500 posts in 1327 days

1034 days ago

Ran across this the other day in the local Craigslist:

The same seller also has a 24” scroll saw and a 24” planer.. Yikes!

-- Dan, Rochester, NY

9 replies so far

View jim C's profile

jim C

1452 posts in 1732 days

#1 posted 1034 days ago

So, when are you having it delivered?
Can you imagine the cost of maintaining the cutterhead!

-- When I was a boy, I was told "anyone can be President", now I'm beginning to believe it!

View SASmith               's profile


1576 posts in 1621 days

#2 posted 1034 days ago

If only it were closer.
I saw online once were a guy put a 24” jointer in his basement shop. Can you imagine?

-- Scott Smith, Southern Illinois

View Rileysdad's profile


110 posts in 1912 days

#3 posted 1034 days ago

A timely post. Spent the afternoon flattening a hard maple plank by hand because it was too big pro fit my 8” jointer.

-- Measure twice, cut once, buy extra stock.

View HorizontalMike's profile


6926 posts in 1548 days

#4 posted 1034 days ago

”Rodger USS New York, cleared for landing approach…”

-- HorizontalMike -- "Woodpeckers understand..."

View superstretch's profile


1500 posts in 1327 days

#5 posted 1034 days ago

haha I’ve been in the USS NY flight deck.. That ship is massive.

-- Dan, Rochester, NY

View usnret's profile


184 posts in 1142 days

#6 posted 1034 days ago

Flip it upside down and pull it behind your truck to grate the street. That thing has to have at least a 5hp motor and probably 3ph.

-- Chief Petty Officer USN(RET) 1991-2011

View JPB's profile


31 posts in 1163 days

#7 posted 1026 days ago

I literally laughed out loud when I saw those pics. What do you think it weighs?

View Drew - Rock-n H Woodshop's profile

Drew - Rock-n H Woodshop

633 posts in 1325 days

#8 posted 1026 days ago

Looks like the one David Marks has in his shop (Woodworks). Dude can put a nickel on it’s edge and start the machine and the nickel won’t fall over because it is so heavy there is no vibration!

-- Drew -- "I cut it twice and it's still too short!"- Rock-n H Woodshop - Moore, OK

View calicant's profile


30 posts in 1042 days

#9 posted 1026 days ago

Rotate the fence 90 degrees and play ping pong

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase