LumberJocks

Grizzly G0555

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Steven H posted 10-30-2011 05:25 PM 957 views 1 time favorited 4 replies Add to Favorites Watch
View Steven H's profile

Steven H

1117 posts in 2520 days


10-30-2011 05:25 PM

For those who own the Grizzly G0555P or Go555. Can you do me a favor and measure from the left slot(where it begins) to the adjustment cap screw.
All this time I have been doing the wrong way.


4 replies so far

View Jim Finn's profile

Jim Finn

2408 posts in 2382 days


#1 posted 10-31-2011 02:07 AM

2 3/8” to the center of the screw on mine

-- "You may have your PHD but I have my GED and my DD 214"

View Steven H's profile

Steven H

1117 posts in 2520 days


#2 posted 10-31-2011 04:01 AM

I found out that measuring the cap screw is not accurate way.

On grizzly manual says have at least 3/4” deflection on V-belt.. I think they made a typo,instead should be 1/4”.

Can you do one more favor and measure your v- belt?. Use thumb with moderate pressure in middle of v-belt.

Sorry for causing problems.

View Jim Finn's profile

Jim Finn

2408 posts in 2382 days


#3 posted 10-31-2011 04:20 AM

Mine is 1/4”. .................... 3/4” on this short a belt would make it slip all the time, in my opinion.

-- "You may have your PHD but I have my GED and my DD 214"

View Steven H's profile

Steven H

1117 posts in 2520 days


#4 posted 10-31-2011 04:32 AM

THANK YOU

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com