LumberJocks

A.A. Woods & Sons spoke pointers and hollow auger

  • Advertise with us

« back to Hand Tools forum

Forum topic by need2boat posted 10-18-2011 07:29 PM 7167 views 0 times favorited 3 replies Add to Favorites Watch
View need2boat's profile

need2boat

544 posts in 2153 days


10-18-2011 07:29 PM

Topic tags/keywords: aa woods sons hollow auger woodworking hand tools brace

Lets keeping this simple. ;-)

I’ve got one and looking to use it in the making of a saw bench for the legs. For the most part I get how it works just not clear on how to adjust the cutting blade on the Hollow auger. I did some googling but really didn’t find much on usage.

If anyone has experience please share.

thanks

Joe


A.A. Woods & Sons hollow auger

-- Second Chance Saw Works http://www.secondchancesawworks.com Blog: Positive Rake http://www.positiverake.com


3 replies so far

View David Kirtley's profile

David Kirtley

1286 posts in 2459 days


#1 posted 10-18-2011 08:38 PM

If I remember correctly, you have the bevel pointing up towards the brace. I think I just put a dowel of known diameter and set the mark to the size and then loosened the blade and moved it until it was in contact with the dowel and the scale agreed with the diameter.

I will try to remember to look for mine when I get home. It has been twenty years since I used mine. I picked up my first lathe a bit after I got mine and it wasn’t so important anymore. :)

-- Woodworking shouldn't cost a fortune: http://lowbudgetwoodworker.blogspot.com/

View Brit's profile

Brit

6711 posts in 2303 days


#2 posted 10-18-2011 10:16 PM

Never used one Joe, but I found this. Hope it helps. I’d love to see a quick video of you using it once you figure it out.

-- Andy -- "I saw the angel in the marble and carved until I set him free." (Michelangelo)

View need2boat's profile

need2boat

544 posts in 2153 days


#3 posted 10-19-2011 02:54 AM

Andy,

Like you I don’t get the chance to visit the shop weekdays but I’ll give it a go this week. I’m finishing up 2 try squares and then I’m getting started on the bench.

I figure if this doesn’t go well I can always make one of the construction lumber, A frame style saw benches.

Joe

-- Second Chance Saw Works http://www.secondchancesawworks.com Blog: Positive Rake http://www.positiverake.com

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com