3M Sand Paper Propagation for the Sandblaster Holder

  • Advertise with us

« back to Finishing forum

Forum topic by David Grimes posted 10-16-2011 07:22 AM 1420 views 0 times favorited 1 reply Add to Favorites Watch
View David Grimes's profile

David Grimes

2078 posts in 2838 days

10-16-2011 07:22 AM

About 3 1/2 months ago, I reviewed a little sand paper holder from 3M (the Sandblaster) that I really like so much better for many sanding chores then the chunky clunky sanding block. You can read the review here if you’d like to:

3M has the little packs of sandpaper for it that contains 8 sheets 2 1/4 by 5 1/2. I initially bought the holder and one pack each of 80, 120 and 220 grit paper for it.

Since then, I realized that if I buy the same 3M sandpaper in the full sheet size, I get 3 each 9×11 sheets… which will cut to 24 of the little sheets (with no waste) and at about the same price as the 8 little sheets.

I am using an inexpensive Fiskar paper cutter that I’ve had for years (and have used numerous times to cut 1/4 sheets for a sander).

That’s it. Cheap, ain’t I ? ;=)

-- If you're going to stir the pot, think BIG spoon or SMALL boat paddle. David Grimes, Georgia

1 reply so far

View spunwood's profile


1202 posts in 3034 days

#1 posted 10-17-2011 05:04 AM

Nice tip man!

-- I came, I was conquered, I was born again. ἵνα ὦσιν ἓν

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics