LumberJocks

grinding wheel on a lathe

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by D_Allen posted 10-09-2011 07:43 PM 1035 views 0 times favorited 1 reply Add to Favorites Watch
View D_Allen's profile

D_Allen

495 posts in 2248 days


10-09-2011 07:43 PM

Has anyone here ever seen this done?
I have a bench grinder that goes way too fast.
I now have a lathe that turns as slow as 600 RPM and has a pivoting headstock.
I know some have used a faceplate and PSA paper for sanding.
What I need is an adapter from 1” x 8TPI to an arbor for a grinding wheel.
Maybe a 6 or 8 inch 180 grit.
Then perhaps one of those homemade jigs for grinding gouges.

-- Website is finally up and running....www.woodandwrite.com


1 reply so far

View lew's profile

lew

11340 posts in 3219 days


#1 posted 10-09-2011 11:32 PM

Never tried the grinding wheel but did make an 8”wooden wheel with a leather strop around the perimeter. Mounted it on the “left” side of the head stock for touching up tools while turning. Worked pretty good.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com