Pellet stove for workshop or house $800

« back to Woodworking Trade & Swap forum

114 posts in 3335 days

10-06-2011 12:05 AM

I am selling a beautiful, Canadian-made pellet stove made by Enviro (enviro.com). It is very small, yet will heat up to 1200 square feet. Has a thermostat-controlled electronic ignitor and holds 40 lbs of pellets with automatic feed. Stove is only 2 years old. I installed it in my garage-workshop myself and it works great! Recently cleaned and well-maintained. Very easy to install. Installation and operator manual included. EXHAUST VENT KIT NOT INCLUDED. Retails new for $2500. Selling for only $800. I’m driving from Boston to LA on October 15th and can deliver to you if you’re on the way.

5 replies so far

Bertha home \| projects \| blog 13521 posts in 2658 days #1 posted 10-06-2011 02:55 AM	That’s a really good deal for someone. It’s too big for my shop but I hope you find someone who can use it. Drive safe. -- My dad and I built a 65 chev pick up.I killed trannys in that thing for some reason-Hog
PurpLev home \| projects \| blog 8534 posts in 3613 days #2 posted 10-06-2011 03:08 AM	thats a nice one. are you moving to LA? -- ㊍ When in doubt - There is no doubt - Go the safer route.
Jason White home \| projects \| blog 114 posts in 3335 days #3 posted 10-06-2011 07:05 PM	Bertha—This is the smallest pellet stove you can buy. My shop is only 400 sq ft. PurpLev—Yes, moving to LA (back home). —Jason
KayBee home \| projects \| blog 1083 posts in 3211 days #4 posted 10-07-2011 01:59 AM	Sounds like a great deal, but I’m kinda broke at the moment. Have a good road trip. -- Karen - a little bit of stupid goes a long way
miltruckman home \| projects \| blog 1 post in 2371 days #5 posted 10-24-2011 07:50 PM	Hi, Did you sell your stove? I am looking for one about that size. Bill

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	12028
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	2106
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	431
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	340
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1370
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	4903
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	6694
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	28051
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	211
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	5406
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1417
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	6232
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1388
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2154
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1186
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	4754
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2200
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	8845

	Author	Latest activity	New comments or replies since you last checked
Scrap and start a new site (archive this one)	LucasWoods	04-22-2018 01:13 AM	sign in to get readership tracking
florescent light won't work	Karda	04-22-2018 01:10 AM	sign in to get readership tracking
Stumpy Nubs Woodworking Journal- A truly unique online publication (part 4)	StumpyNubs	04-22-2018 01:04 AM	sign in to get readership tracking
Table Saw/Router station finally done!	Coachgut	04-22-2018 12:57 AM	sign in to get readership tracking
Mason Bee house	ralbuck	04-22-2018 12:56 AM	sign in to get readership tracking
Off-topic content. Click to see the post.	chrisstef	04-22-2018 12:56 AM	sign in to get readership tracking
Pulled the trigger on a Delta 36-725 table saw today. Buyers remorse???	HalfShirt	04-22-2018 12:52 AM	sign in to get readership tracking
HOT DEALS Thread. Black Friday, eBay, Amazon, BORG, Zoro, Woodcraft, etc.	Woodknack	04-22-2018 12:48 AM	sign in to get readership tracking
Hand held CNC ? what do you think?	a1Jim	04-22-2018 12:36 AM	sign in to get readership tracking
Scylla Console	zdanielz	04-22-2018 12:34 AM	sign in to get readership tracking

Pellet stove for workshop or house $800

5 replies so far

Have your say...

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Scrap and start a new site (archive this one)

florescent light won't work

Stumpy Nubs Woodworking Journal- A truly unique online publication (part 4)

Table Saw/Router station finally done!

Mason Bee house

Off-topic content. Click to see the post.

Pulled the trigger on a Delta 36-725 table saw today. Buyers remorse???

HOT DEALS Thread. Black Friday, eBay, Amazon, BORG, Zoro, Woodcraft, etc.

Hand held CNC ? what do you think?

Scylla Console

Pellet stove for workshop or house $800

5 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...