LumberJocks

I pick up a Paslode Impluse 325 Cordless Framing Nailer off E-bay!

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Beginningwoodworker posted 09-17-2011 05:27 PM 2591 views 0 times favorited 19 replies Add to Favorites Watch
View Beginningwoodworker's profile

Beginningwoodworker

13347 posts in 2677 days


09-17-2011 05:27 PM

I pick up me a Paslode Impluse 325 Cordles Framing Nailer off E-bay for $69.99 plus $20 bucks for shipping. How do you guys think I did?


19 replies so far

View Bill White's profile

Bill White

3915 posts in 2964 days


#1 posted 09-17-2011 05:59 PM

Ya done good.
How much framing are you going to do?
Bill

-- bill@magraphics.us

View Beginningwoodworker's profile

Beginningwoodworker

13347 posts in 2677 days


#2 posted 09-17-2011 06:16 PM

I got to reframe my little 10×12 shed/shop. Plus I plan on using it for other projects!

View ,'s profile

,

2387 posts in 2550 days


#3 posted 09-17-2011 06:26 PM

Sounds like a great deal.

-- .

View ChefHDAN's profile

ChefHDAN

567 posts in 1853 days


#4 posted 09-17-2011 06:27 PM

It’s a good deal for hoseless work, watch the $$$ for a bigger job though, those gas cartridges add up.

View lew's profile

lew

10538 posts in 2759 days


#5 posted 09-17-2011 07:02 PM

COOL, CJ!!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Beginningwoodworker's profile

Beginningwoodworker

13347 posts in 2677 days


#6 posted 09-17-2011 07:06 PM

I know the gas cartidges can add up, but its cheaper than buy another compressor to run a framing nailer.

View ChefHDAN's profile

ChefHDAN

567 posts in 1853 days


#7 posted 09-17-2011 07:08 PM

No Argument from me, but don’t forget every job needs some new tools…. What size compressor are you shopping for ??? LOL

View Beginningwoodworker's profile

Beginningwoodworker

13347 posts in 2677 days


#8 posted 09-17-2011 07:10 PM

LOL! I heard that you need at lest a 6 gal compressor to run a framing nailer.

View longgone's profile

longgone

5688 posts in 2312 days


#9 posted 09-17-2011 07:27 PM

When I was building my workshop I use a 2 gallon Ridgid air compressor to operate my framing nailer. Worked just fine unless you are nailing like a racehorse.

View Beginningwoodworker's profile

Beginningwoodworker

13347 posts in 2677 days


#10 posted 09-17-2011 07:31 PM

I got a Bostitch Trim Air Compressor, its only 1.6 gal.

View Mark's profile

Mark

1801 posts in 2277 days


#11 posted 09-17-2011 07:36 PM

those are the cats @ss! No more dragging around the air hose

-- M.K.

View thinker1's profile

thinker1

31 posts in 2410 days


#12 posted 09-17-2011 08:58 PM

how much are the fuel cells??

-- happy wife great life!!!!!!

View Beginningwoodworker's profile

Beginningwoodworker

13347 posts in 2677 days


#13 posted 09-17-2011 10:13 PM

$14.98 at Home Depot.

View Bob Kollman's profile

Bob Kollman

1797 posts in 2194 days


#14 posted 09-18-2011 06:26 AM

Charles, reminds me of the nail gun in Lethal Weapon 2, you gonna nail some bad boys with that sucker?
80 bucks is a bargin!!! Winters coming you better start on your framing pretty quick!!!!

-- Bob Kenosha Wi.

View David Grimes's profile

David Grimes

2078 posts in 1643 days


#15 posted 09-18-2011 06:54 AM

You got a great deal as long as it works. I bought one of them as soon as they came out many years ago (mine is orange). If this is completely new to you, a little advise: DO follow the maintenance/cleaning procedure for the combustion chamber as that is the heart of these guns. Also, when your battery conks out, you CAN trust the imported ones. A couple of years ago, I got two for less than $30 from an Ebay Top-rated seller with thousands of transactions and 99.9% rating… instead of $40 + each for the Paslode brand. The two work just fine and hold a charge much longer than my old one.

I take the battery out of the gun when not in use. There is no issue with leaving the fuel cell in he gun since it is relaxed (not connected fully) when the trigger is not being depressed. Keep an eye on the hinge pin on the “door” to the fuel cartridge. If it ever hangs out on either side, then when you close it you will have loads of fun getting it back open.

Good luck.

-- If you're going to stir the pot, think BIG spoon or SMALL boat paddle. David Grimes, Georgia

showing 1 through 15 of 19 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com