LumberJocks

is it just me rockler quadrant hinges

  • Advertise with us

« back to Jigs & Fixtures forum

Forum topic by ruger posted 11-16-2018 02:11 AM 292 views 0 times favorited 0 replies Add to Favorites Watch
View ruger's profile

ruger

51 posts in 301 days


11-16-2018 02:11 AM

been making keepsake boxes for a few years. i have been hand fitting the hinges or making hingeless lids. so a few months ago at a yard sale was a rockler hinge jig it kit ,never used with templates, hinges, 3/16 router bit and 4 sets of hinges none were ever opened..for 2 dollars .. so after messing around with it on scrap box got to the point where the hinges fit like a glove. tonight put a box together all went well till i shut the lid, couldn’t get it open without turning box on it’s side…. the problem is the half moon shaped quadrant drops about a 16 of an inch out of the top lid doesn’t fall out just drops a bit and binds the hinge…took the hinge off and put a small piece of wire through the drilled hole in the quadrant where it sits in the lid and all is well.,.,..it appears to me this is a problem with their design. some where i remember reading someone stating this same concern. so if any one with more experience with this or has run into this i would love to hear from you . don’t want to be jury rigging any more box lids. other than that the hinges turned out really nice as far as the fit turned out. thanks for reading post.


0 replies so far

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com