RE. PLANER BLADES (sharpened)

I WAS ASKED TO LET EVERY ONE KNOW WHAT I CAME UP WITH.
I don’t know if you L J’s have been following my topic on sharpening my own planer blades. I got quite a few comments on solving this problem, most of them were to sharpen (hone) them by hand. I do not have that kind of time…... then to hone out a nick would take many hours I do not have. One tip included off setting the nicked blade by 1/32” , which would solve the problem temporarily, but they still must be sharpened. I will probably end up with the small machine from grizzly at the link below or one like it. Grizzly not being the cheapest company around, I intend to try to find one else where like Harbor Freight or some place like that. This machine presently sells for $209.00 plus whatever? Which is not too bad a price…. if you want to consider having a machinist do it….... 2 or 3 times would probably pay for itself.
SO THANK YOU LUMBERJOCKS FOR SOLVING MY PROBLEM !!

Dave
http://www.grizzly.com/products/G2790/images/

-- Dave Leitem,Butler,Pa.,http://dlcarver.etsy.com