LumberJocks

Recommend a 220V table saw switch?

  • Advertise with us

« back to Safety in the Woodworking Shop forum

Forum topic by Bertha posted 08-16-2011 02:58 PM 14544 views 0 times favorited 12 replies Add to Favorites Watch
View Bertha's profile

Bertha

13070 posts in 2329 days


08-16-2011 02:58 PM

I’m looking for a 220V-capable safety switch for my tablesaw. Magnetic is preferred. Large paddle shutoff is preferred. For a 2-3hp 220V single-phase motor.

I snagged mine with my coveralls and broke the post that receives the screw for the cover on my vintage JET.

Any recommendations appreciated!

I’ve looked on Amazon at:
1) the MLCS
2) the Grizzly (110V only)
3) the Kreg

-- My dad and I built a 65 chev pick up.I killed trannys in that thing for some reason-Hog


12 replies so far

View lew's profile

lew

11569 posts in 3391 days


#1 posted 08-16-2011 02:59 PM

check the grizzly site

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Roger's profile

Roger

20688 posts in 2440 days


#2 posted 08-16-2011 03:03 PM

try this link: http://woodworker.com/c-Machinery-components/Controls/?gclid=CJy0s4fw06oCFZWM5god8XKP3Q

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View ajosephg's profile

ajosephg

1880 posts in 3197 days


#3 posted 08-16-2011 03:12 PM

How about Grainger or McMaster Carr?

-- Joe

View hairy's profile

hairy

2476 posts in 3168 days


#4 posted 08-16-2011 03:34 PM

I have one of these, brand new – never hooked up. I can make you a good deal.

http://www.mikestools.com/438-01-317-0153-Delta-Starter-Switch_438-01-317-0153.aspx

-- stay thirsty my friends...

View Bertha's profile

Bertha

13070 posts in 2329 days


#5 posted 08-16-2011 03:48 PM

Looks good, Hairy! Shoot me a PM and let’s get this thing on the road. That’s exactly what I’m looking for.
Thanks for the replies, gents. I don’t think I NEED magnetic and I’m certainly not shelling out a few hundred for one. Thanks again!

-- My dad and I built a 65 chev pick up.I killed trannys in that thing for some reason-Hog

View philip marcou's profile

philip marcou

262 posts in 2233 days


#6 posted 08-18-2011 11:41 AM

I was about to tell you to exercise some ingenuity and fix the switch…..But if you relieve Hairy of that Delta switch that would be good too. The benefits of mag switches on single phase motors are debatable :more to go wrong /get filled with dust/ hum/vibrate/ fail to start/puff smoke/burn coil etc but at least you will not be able to easily overload the motor now (assuming you set the overload correctly {;}

View Sawdust2's profile

Sawdust2

1467 posts in 3724 days


#7 posted 08-18-2011 12:40 PM

I got mine from Grizzly. Direct wire, not a plug in.
It has the BIG “Stop” paddle.

Great investment. Especially as I am an older folk.

Lee

-- No piece is cut too short. It was meant for a smaller project.

View Bertha's profile

Bertha

13070 posts in 2329 days


#8 posted 08-18-2011 01:57 PM

Thank you Philip and Lee. On further consideration, it’s only the receptacle that’s broken. In honesty, I hadn’t even considered trying to replace the receptacle alone. I’m even told that OEM or the equivalent might still be available. I’m still considering my options.

-- My dad and I built a 65 chev pick up.I killed trannys in that thing for some reason-Hog

View IrreverentJack's profile

IrreverentJack

725 posts in 2479 days


#9 posted 08-19-2011 02:54 AM

Al, Look at a “parts list” for a newer saw with a switch that satisfies your requirements. Switch , box, cover, mounting flange, wires, terminals/plugs, strain relief . I’ve found the Grizzly folks very helpful with this. Saves time hunting in the hardware store. -Jack

View mrg's profile

mrg

742 posts in 2635 days


#10 posted 08-19-2011 03:37 AM

Bertha,
Try etoolclub. The prices are good and are a jet parts distributor. I just went to the set and looks like they are having issues with the server. I bought parts from them last year, takes about a week.

-- mrg

View Bertha's profile

Bertha

13070 posts in 2329 days


#11 posted 08-19-2011 03:42 AM

Thanks Mrg!

-- My dad and I built a 65 chev pick up.I killed trannys in that thing for some reason-Hog

View Don W's profile

Don W

18279 posts in 2203 days


#12 posted 08-26-2011 01:42 AM

And Al. If the coveralls can catch a switch they will catch a blade, a pulley or a drive shaft. We’d hate for you to loose something dear to you that you keep inside the coveralls. And i’m not talking about your hands in your pockets!.

The Grizzley catolog has an array of those switches. If not www.grainger.com. They have anything electrical or industrial you could ever want.

-- http://timetestedtools.net - Collecting is an investment in the past, and the future.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com