LumberJocks

Porter Cable Dust Bag Needed

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by ChesapeakeBob posted 08-11-2011 05:13 PM 1019 views 0 times favorited 11 replies Add to Favorites Watch
View ChesapeakeBob's profile

ChesapeakeBob

365 posts in 2950 days


08-11-2011 05:13 PM

Topic tags/keywords: porter cable dust bag

I am in search of a used (inexpensive) dust bag for a Porter cabe 352VS belt sander. If you have an old one, and you would like to sell it to me, send me a message and we’ll work it out. I’d be happy to send you a check.

Thanks,

CB

-- Chesapeake Bob, Southern Maryland


11 replies so far

View usnret's profile

usnret

184 posts in 1975 days


#1 posted 08-11-2011 11:35 PM

www.woodworkingshop.com I have seen them in their catalog for like 15-20 bucks for a new bag.

-- Chief Petty Officer USN(RET) 1991-2011

View Grandpa's profile

Grandpa

3256 posts in 2143 days


#2 posted 08-12-2011 05:01 AM

I have bought repair parts from CPO. This is online. I have never bought a duct bag for a sander so have no idea bout the cost. Check them out. I have been very happy with them.

View Grandpa's profile

Grandpa

3256 posts in 2143 days


#3 posted 08-12-2011 05:08 AM

I don’t know which model you have etc but I put in ”cpo portercable repair parts ”and I came up with 2 or 3 real fast. Sears actually operated the one I opened. The dust bag for that model was $26.88 new.

View robert triplett's profile

robert triplett

1566 posts in 2572 days


#4 posted 08-12-2011 06:24 AM

CB, I have one somewhere. I took it off after a few weeks of using the sander. It got in my way. I will look for it tomorrow morning. I put tape and a baggie over the port. I blow out the dust after every use and have had no issues. It does make a lot of dust though.

-- Robert, so much inspiration here, and now time to work!!!

View ChesapeakeBob's profile

ChesapeakeBob

365 posts in 2950 days


#5 posted 08-12-2011 04:06 PM

Robert, thanks. Let me know when you find it. Send me a message. Hopefully, we can work something out.

Thanks,

CB

-- Chesapeake Bob, Southern Maryland

View robert triplett's profile

robert triplett

1566 posts in 2572 days


#6 posted 08-12-2011 07:50 PM

CB, I found it. I will check at the PO today for cost of mailing. I would be interested in a trade more than $$ for it. I make boxes. Do you have any pieces of figured wood that could make a nice box top? 1/2’to 3/4: x 10” x 6-7”. I live in a place that has a lot of big Fir and Pine trees. I have to look far and wide for other types of wood. Otherwisw, maybe $10.00 and the cost of mailing?

-- Robert, so much inspiration here, and now time to work!!!

View ChesapeakeBob's profile

ChesapeakeBob

365 posts in 2950 days


#7 posted 08-12-2011 09:27 PM

Robert, I just sent you a Lumberjocks Private Message.

You are just one more reason why Lumberjocks are the BEST!

CB

-- Chesapeake Bob, Southern Maryland

View ChesapeakeBob's profile

ChesapeakeBob

365 posts in 2950 days


#8 posted 08-15-2011 10:05 PM

Robert, I found a beautiful piece of red oak, SFS, that I’ll swap you for the dust bag. It measures 13.75” x 5.5” x .75”. I’ll send you this and pay the postage if you’ll send the dust bag and pay the postage on the bag.

Just confirming, it is the Porter Cable 352VS that needs the dust bag.

E-mail me at bobohler@comcast.net or send me a Private Message here on Lumberjocks.

CB

-- Chesapeake Bob, Southern Maryland

View ChesapeakeBob's profile

ChesapeakeBob

365 posts in 2950 days


#9 posted 08-18-2011 01:25 AM

Ping! I am still looking for anyone that has an old Porter Cable dust that they would sell or trade to me.

Thanks!

CB

-- Chesapeake Bob, Southern Maryland

View ChesapeakeBob's profile

ChesapeakeBob

365 posts in 2950 days


#10 posted 08-18-2011 12:34 PM

Thank you Landog. If it is not my model, maybe it will fit anyway. Maybe you can measure the tube where the bag attaches. I think mine is roughly 1” in diameter. I’ll be waiting to hear from you.

CB

-- Chesapeake Bob, Southern Maryland

View Bluepine38's profile

Bluepine38

3341 posts in 2552 days


#11 posted 08-20-2011 08:11 PM

Just my two cents, I have a shop vac that I rigged up thein cyclone on, I use the small hose and hook it up
to my old Rockwell belt sander. The hose if flexible enough it does not get in the way and it really cuts down
on the amount of dust in my shop. I had to make my own adapter and silicone rtv it the sander, but it was
worth the effort.

-- As ever, Gus-the 77 yr young apprentice carpenter

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com