LumberJocks

What is it?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by AlaskaGuy posted 07-11-2018 09:41 AM 586 views 0 times favorited 12 replies Add to Favorites Watch
View AlaskaGuy's profile

AlaskaGuy

4371 posts in 2429 days


07-11-2018 09:41 AM

https://anchorage.craigslist.org/tls/6635405775.html

-- Alaskan's for Global warming!


12 replies so far

View Desert_Woodworker's profile

Desert_Woodworker

1591 posts in 1335 days


#1 posted 07-11-2018 10:21 AM

part of a Power Matic canning machine for processing Muktuk

-- Desert_Woodworker

View Rich's profile

Rich

3548 posts in 710 days


#2 posted 07-11-2018 02:43 PM

Looks like part of a hoist. Either that, or it’s a yellow thingy with rollers. Not sure which.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View Don Broussard's profile

Don Broussard

3649 posts in 2372 days


#3 posted 07-11-2018 02:53 PM

Looks like the heads out of a Powermatic BetaMax player. But seriously, maybe the rollers are part of a banding tool?

-- People say I hammer like lightning. It's not that I'm fast -- it's that I never hit the same place twice!

View Porchfish's profile

Porchfish

842 posts in 2653 days


#4 posted 07-11-2018 02:57 PM

If it had 2 more rollers on the bottom it could be a shop built cane bender. A handy lil’ device that you feed split green cane into the top over then under the rollers then continue with the cane exactly the opposite direction, leavin the cane in place and suspending it over steaming water for an hour or so then back the cane out…voila bent cane. Changing direction allows you to make a small s scroll instead of the larger C scroll….cane uses ? chairs & table leg supports etc & decorative items…. But you only have one set of rollers….oh well… nice conversation starter anyway ! Or could the bottom rollers be eliminated by dowels through the 3 holes on the sides ?....

-- The pig caught under the fence is always the one doing all the squealing !

View Dwain's profile

Dwain

567 posts in 3979 days


#5 posted 07-11-2018 03:05 PM

Smart money is on yellow thingy with rollers. Not to get too technical.

-- When you earnestly believe you can compensate for a lack of skill by doubling your efforts, there is no end to what you CAN'T do

View Bill_Steele's profile

Bill_Steele

407 posts in 1852 days


#6 posted 07-11-2018 03:08 PM

lol +1 for a processor of Muktuk

View Planeman40's profile

Planeman40

1239 posts in 2881 days


#7 posted 07-11-2018 03:19 PM

Nah! I have seen these before in my travels by dog sled in the arctic. It is just photographed upside down. It’s an Eskimo inline skate for summertime when the ice recedes and the beaches are bare. : )

-- Always remember: It is a mathematical certainty that half the people in this country are below average in intelligence!

View bandit571's profile

bandit571

21077 posts in 2804 days


#8 posted 07-11-2018 03:22 PM

Slider for a Zip line.

-- A Planer? I'M the planer, this is what I use

View AlaskaGuy's profile

AlaskaGuy

4371 posts in 2429 days


#9 posted 07-11-2018 05:02 PM

If It had anything at all do with Mukluk I’d know.

-- Alaskan's for Global warming!

View bold1's profile

bold1

302 posts in 1967 days


#10 posted 07-11-2018 05:47 PM

Looks like a door trolley made to run back and forth on a box beam. Maybe for an industrial assembly line?

View ocean's profile

ocean

102 posts in 953 days


#11 posted 07-11-2018 07:10 PM

I vote for the trolley.

-- Bob, FL Keys

View ohtimberwolf's profile

ohtimberwolf

858 posts in 2472 days


#12 posted 07-11-2018 09:21 PM

Porchfish, so there are 4 rollers, two top, two bottom. larry

-- Just a barn cat, now gone to cat heaven.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com