LumberJocks

Feather board - Feeder rollers

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by niki posted 2672 days ago 1201 views 0 times favorited 4 replies Add to Favorites Watch
View niki's profile

niki

426 posts in 2684 days


2672 days ago

Good day

Not much to say, the pictures are saying it all.

The unit is connected to the rail.

I push it to the board to create some “bow” and lock it.

It pushes the board to the fence and at the same time, down to the table.

Lately, I replaced all the wing nuts with knobs for easier operation.

The example is made with melamine board but, the few last pics are with the “real one”, Oak, 1¼” thick.

Regards
niki

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket


4 replies so far

View Dick, & Barb Cain's profile

Dick, & Barb Cain

8693 posts in 2904 days


#1 posted 2672 days ago

Nice setup Niki.
There must be a lot less resistance, without the friction of a featherboard.

-- -** You are never to old to set another goal or to dream a new dream ****************** Dick, & Barb Cain, Hibbing, MN. http://www.woodcarvingillustrated.com/gallery/member.php?uid=3627&protype=1

View Karson's profile

Karson

34862 posts in 3005 days


#2 posted 2672 days ago

Very nice Nike. Do you ever make anything besides Jigs. There great and keep them coming. But we’d also like to see some finished projects.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Southern Delaware karson_morrison@bigfoot.com †

View niki's profile

niki

426 posts in 2684 days


#3 posted 2672 days ago

Thank you

Dick
The feeding is “rolling” and the adjustment is very easy, just push with one hand to “spring load” the bar and lock.
I think that it can be done also on the miter slot.

Karson
Well, from time to time I also make some furniture but being an amateur, without “delivery date”, gives me the benefit to stop in the middle of a project just to build a jig for easier and more accurate operation and usually I make jigs that I will use again and again so it’s worth it.
I’ll post also some projects.

Thanks
niki

View Drew1House's profile

Drew1House

425 posts in 2692 days


#4 posted 2671 days ago

Nice… Ill build one of those soon…

Drew

-- Drew, Pleasant Grove, Utah

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase