Rosewood Wanted

  • Advertise with us

« back to Wood & Lumber forum

Forum topic by Binn posted 1151 days ago 1789 views 4 times favorited 8 replies Add to Favorites Watch
View Binn's profile


86 posts in 1556 days

1151 days ago

Can someone tell me where I can buy rosewood lumber? Looking for 8” wide x 4’ long and 4/4” thick or so.
I need a good quality deep red quarter sawn lumber.

-- Barry, Louisiana

8 replies so far

View Joe Weaver's profile

Joe Weaver

396 posts in 2288 days

#1 posted 1151 days ago

Try Just south of Altanta Ga. Great people to deal with

-- Joe, Ga

View JoeyG's profile


1233 posts in 1227 days

#2 posted 1150 days ago

I picked some up from here a couple of weeks ago and it is beautiful. I believe they ship also. There must be a place closer to you, it’s just a matter of finding it. Good luck

-- JoeyG ~~~

View Loren's profile


7259 posts in 2250 days

#3 posted 1150 days ago

Look on ebay too. People sell all kinds of exotics and rosewood
is used in instrument making too.


View patron's profile


12963 posts in 1943 days

#4 posted 1148 days ago

check this

and PM bibb

he was selling
may still have some left

good luck

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View RONFINCH's profile


142 posts in 1526 days

#5 posted 1136 days ago

Not sure if you found any yet, may be woth a try.

View BentheViking's profile


1746 posts in 1166 days

#6 posted 1135 days ago

I am in New Orleans. Not sure where you are, but there are plenty of lumber yards in the area one of which can probably get you rosewood, if they don’t have it in stock.

Liberty Lumber, Riverside Fine Lumbers, Carruth Bros. Lumber, Wilson Bourg Lumbers, Gueydan Lumber

There are probably others, but those are the ones I have worked with. Riverside would be your best bet probably, but its way out in NO East.

-- It's made of wood. Real sturdy.--Chubbs Peterson

View Binn's profile


86 posts in 1556 days

#7 posted 1132 days ago

I am in Denham Springs and will give these lumber yards a call, it has been hard to find. Thanks everyone for the information.

-- Barry, Louisiana

View McKinneyMike's profile


79 posts in 1263 days

#8 posted 1132 days ago

Barry, We sell Rosewood, but 8” widths are rare as rare can be. I have seen probably three boards that wide in the past few years. Most is typically 3”-6” in width with an occasional 7” board here and there. Lengths are good to 5’ usually, but 8” wide boards are generally snapped up for musical instrument stock well before it gets out of the distributors yards, if it is any good at all. Best of luck with your search!

-- McKinney Hardwood Lumber --Specializing in exotic and figured hardwood lumber -McKinney, TX

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase