LumberJocks

Fazlok Connectors

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by wjt99 posted 05-11-2018 11:30 PM 371 views 0 times favorited 1 reply Add to Favorites Watch
View wjt99's profile

wjt99

19 posts in 1715 days


05-11-2018 11:30 PM

I have used a couple of these for years and occasionally they have disconnected. I finally decided to do something about it.

A simple fix. With the bayonet connector fully engaged I drilled a 1/8” hole through both halves of the connection. I made a push pin from a 1/8” aluminum rivet and a mini shaker peg. Gravity and a press fit keep the pin in place but is easily removed if I need to move the hose to another port.

Bill


1 reply so far

View fivecodys's profile

fivecodys

1223 posts in 1835 days


#1 posted 05-15-2018 08:46 PM

Sounds like a good solution.
Thanks for sharing!

-- I always knew I would grow old, But I expected it to take longer!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com