LumberJocks

Installing shelf in upper corner kitchen cabinet

  • Advertise with us

« back to Designing Woodworking Projects forum

Forum topic by SiRiC posted 04-17-2018 01:19 AM 365 views 0 times favorited 3 replies Add to Favorites Watch
View SiRiC's profile

SiRiC

8 posts in 2221 days


04-17-2018 01:19 AM

Hi,

I am building kitchen cabinets and am using 24” angled front cabinets for the upper corners. As I was getting ready to assemble, I realised that I might not be able to get the shelf in after assembly.

Is it there a trick that I am missing or do I have to fit it in before I assemble?

Thanks

Steve

-- Measure twice...ummm.. i forget the rest!!


3 replies so far

View jbay's profile

jbay

2874 posts in 1099 days


#1 posted 04-17-2018 01:51 AM

Should be able to get them in. Depends a lot on how you build the cabinet and face frame
(Stile width) (back thickness) (scribe space)

If I were you I would build the cabinet and before you put backs on (if you have backs) check to see if you can fit the shelf through the frame opening. You should be able to figure what to do at that point.

View SiRiC's profile

SiRiC

8 posts in 2221 days


#2 posted 04-18-2018 01:32 AM

Will try that.

Thanks

-- Measure twice...ummm.. i forget the rest!!

View Kelly's profile

Kelly

2125 posts in 3144 days


#3 posted 04-18-2018 04:35 PM

When I installed a few, I had to insert both, on end, then lift them both to just above the first, lower position, install the support pegs. Then I lifted the second and installed its support pins.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com