LumberJocks

63 x 92? Oak? 9ply?

  • Advertise with us

« back to Wood & Lumber forum

Forum topic by WPWorkshop posted 04-15-2018 06:20 PM 457 views 0 times favorited 11 replies Add to Favorites Watch
View WPWorkshop's profile

WPWorkshop

5 posts in 170 days


04-15-2018 06:20 PM

I found this 63×92 plywood in an old shack in NW Louisiana. Can anybody tell me anything about it? Ive never seen anything with these dimensions before.


11 replies so far

View WyattCo's profile

WyattCo

79 posts in 68 days


#1 posted 04-15-2018 06:36 PM

It appears to be made of wood.

That’s all I got brother!

View CaptainKlutz's profile

CaptainKlutz

246 posts in 1458 days


#2 posted 04-15-2018 07:43 PM

That is odd size?

Plywood mfg can make many custom sizes beyond what retail market offers. RV & Aircraft mfg commonly use custom panels with special face lamination’s. Typical maximum size limitation is 60×144, which makes 63 inch dimension curious? Custom sizes are not advertised, and ordering involves working directly with mfg; so you will not find often find oversized panels advertised for sale very often.

Best Luck.

-- I'm an engineer not a woodworker, but I can randomly find useful tools and furniture inside a pile of lumber!

View WPWorkshop's profile

WPWorkshop

5 posts in 170 days


#3 posted 04-15-2018 08:28 PM

Guess I’ll be using these 8 pieces for a new miter station and clamping station I’ve been wanting. Thank you CaptainKlutz

View WyattCo's profile

WyattCo

79 posts in 68 days


#4 posted 04-15-2018 10:02 PM


It appears to be made of wood.

That s all I got brother!

- Fthis

Another Great Answer from Mr. ”Fyou”??

- Rick

A little humor in your day. Accept it or reject it but move on. Why attempt to be confrontational?

View WPWorkshop's profile

WPWorkshop

5 posts in 170 days


#5 posted 04-16-2018 12:00 AM

I just want to be educated on what I have. Other than that, don’t comment. If you don’t have anything constructive and/or informative to say, then move on

View caboxmaker's profile

caboxmaker

267 posts in 352 days


#6 posted 04-16-2018 12:03 AM



It appears to be made of wood.

That s all I got brother!

- Fthis


LOL

View John Smith's profile (online now)

John Smith

705 posts in 127 days


#7 posted 04-16-2018 12:37 PM

WP – I have worked with 1/2” thick 5’x10’ plywood panels at a military base 25 years ago.
so like Klutz says, it may be a remnant from a military or RV project.
personally, I would not put a high value on it as it is not especially rare.
but ~ the 63” wide is a bit odd as I would think that 60” wide would be the norm.
[Georgia Pacific is a big plywood manufacturer, maybe you could shoot them an inquiry].

.

.

-- Graduated Valedictorian from the University of HardKnocks --

View Nubsnstubs's profile (online now)

Nubsnstubs

1279 posts in 1694 days


#8 posted 04-16-2018 02:13 PM

Check your end grain ends to see if it hasn’t been pieced to make up the 63” width. I’ve been doing that on furniture I’ve built over the years by tongue and grooves to make up 72” panels. Several almost looked like 1 piece veneer. I just made one at 63” wide X 40” last week for a TV cabinet. ..... Jerry (in Tucson

-- Jerry (in Tucson) www.woodturnerstools.com

View ArtMann's profile

ArtMann

931 posts in 780 days


#9 posted 04-16-2018 10:15 PM

So little, in fact, that I failed to see it at all! Why attempt to be funny?


A little humor in your day. Accept it or reject it but move on. Why attempt to be confrontational?

- WyattCo


View caboxmaker's profile

caboxmaker

267 posts in 352 days


#10 posted 04-17-2018 01:53 AM



I just want to be educated on what I have. Other than that, don t comment. If you don t have anything constructive and/or informative to say, then move on

- WPWorkshop


Half the site would have to move on if your rule was followed.

View Jbay's profile

Jbay

2227 posts in 863 days


#11 posted 04-17-2018 02:00 AM

You have a piece of plywood, 63×92.
It appears to be 9 ply but hard to tell in the picture.
Schooled!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com