Barrel hinges for small boxes

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by robdem posted 05-11-2011 05:50 AM 1568 views 0 times favorited 2 replies Add to Favorites Watch
View robdem's profile


377 posts in 2030 days

05-11-2011 05:50 AM

Looking to use barrel hinges for some boxes making .Wood is all 1/2 inch thick . Don’t know where to start . Believe wood needs to be cut at a 45 degree angle for top and back piece to match up . Any and all help is welcome thanks guys

2 replies so far

View Kent Shepherd's profile

Kent Shepherd

2715 posts in 2710 days

#1 posted 05-11-2011 04:18 PM

Rockler is a good source for that. They also have other sizes than these.


View ShaneA's profile


6429 posts in 2022 days

#2 posted 05-11-2011 04:58 PM

The top and back will need to be beveled at 45 degrees in my experience. You want to drill the holes before you bevel the edges. Plus you will want to make sure you have the depth correct for the holes and spaced evenly from side to side and front to back. Can be tricky to line up for assembly.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics