LumberJocks

Judson Beaumont chest/dresser design

  • Advertise with us

« back to Designing Woodworking Projects forum

Forum topic by Sawtooth posted 1159 days ago 1245 views 0 times favorited 5 replies Add to Favorites Watch
View Sawtooth's profile

Sawtooth

115 posts in 1898 days


1159 days ago

Topic tags/keywords: question

I was looking at some of Judson Beaumont’s work and was wondering how he builds these;

http://www.straightlinedesigns.com/sobey.html
http://www.straightlinedesigns.com/cindy.html

Does anyone have any ideas about the construction of these? It looks to me that he may use a bent lamination form for the sides then cuts the front and back using a template including drawer openings on sheet of plywood or mdf. Then attaches them somehow. After that he uses nicer veneer to match it all up and cover the whole thing.

Any ideas??? I’d like to try it and would do it the way I described above. But if there is a “right” way It would make it a lot easier.

Thanks

-- "I'm a lumbrjock and I'm OK..."


5 replies so far

View HerbC's profile

HerbC

1147 posts in 1443 days


#1 posted 1159 days ago

You might want to talk to Brent, He’s done a couple of simular projects…

Look Here

Good Luck!

Be Careful!

Herb

-- Herb, Florida - Here's why I close most messages with "Be Careful!" http://lumberjocks.com/HerbC/blog/17090

View Loren's profile

Loren

7154 posts in 2232 days


#2 posted 1159 days ago

Vacuum veneering. You build a form for the panels and laminate
them up. Then you’d put front, back and sides of the cabinet
together and veneer and trim each side one at a time by putting
it back in the bag or using some variant of hammer veneering.

Organize your process about making a veneerable 3-dimensional
substrate in the shape you want first.

-- http://lawoodworking.com

View jack1's profile

jack1

1907 posts in 2611 days


#3 posted 1159 days ago

I’ve seen plans for them on one of the sites that sells them. THey look neat.

-- jack -- ...measure once, curse twice!

View Sawtooth's profile

Sawtooth

115 posts in 1898 days


#4 posted 1159 days ago

Thanks

-- "I'm a lumbrjock and I'm OK..."

View patron's profile

patron

12947 posts in 1925 days


#5 posted 1159 days ago

bending the sides might be to muck work
for steam and forms

but saw kerfing alternately back and forth
would give you the ply-ability
and fill with epoxy to keep them there on a form
sand and veneer as stated

or some thinner layers ov ply laminated together
over a form

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase