LumberJocks

SawStop Mitre Angles

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by SpottedGum posted 03-22-2018 03:43 AM 369 views 0 times favorited 4 replies Add to Favorites Watch
View SpottedGum's profile

SpottedGum

13 posts in 983 days


03-22-2018 03:43 AM

I need to cut bevels on 130×30 hardwood 2.4m long. But the bevel needs to be 46.2 deg. I’d like to buy a saw stop table saw as next level up in my workshop tools but they only go to 45 deg. Has anyone modified or tricked a sawstop to cut further than 45deg?
The model I’m looking at is the Contractor series.
Thanks


4 replies so far

View MrUnix's profile

MrUnix

7051 posts in 2402 days


#1 posted 03-22-2018 03:45 AM

Any saw will do 46.2 degrees. Just flip the board and set the angle to 43.8 degrees.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View SpottedGum's profile

SpottedGum

13 posts in 983 days


#2 posted 03-22-2018 03:54 AM

Ahh yes, thanks for the obvious!

View bonesbr549's profile

bonesbr549

1576 posts in 3270 days


#3 posted 03-22-2018 06:38 PM

I have an Sawstop ICS, and to me for Miter angle fine adjustments. I use the Incra 1000HD for boards/and the incra 5000 for panels. Best solution I’ve had.

-- Sooner or later Liberals run out of other people's money.

View jonah's profile

jonah

1926 posts in 3501 days


#4 posted 03-22-2018 09:16 PM

Never listen to people who tell you to not pay attention in geometry class.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com