Silly Angels Tricks are for kids

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by woodworm1962 posted 03-03-2018 07:46 PM 196 views 0 times favorited 1 reply Add to Favorites Watch
View woodworm1962's profile


145 posts in 29 days

03-03-2018 07:46 PM

Silly question…

First I am finally going to make a Mobile SHEET GOOD and scrap cart. SO much of my sheets goods are ruined from laying on my concrete floor.

I am going to make a 2 by 8 foot cart with casters for storing my sheet goods and on the back scrap wood.

What ANGLE would you make the upright part that the sheet goods would rest against….

I am thinking 5 to 7 degrees

-- No one likes the truth...

1 reply so far

View John Smith's profile

John Smith

559 posts in 91 days

#1 posted 03-03-2018 09:59 PM

I found no need for an angle. the cart had three sides firmly screwed together.
something like a box with one side missing. tallest heavier items should be in the middle.
my 4’ x 3’ cart was on casters. the long pieces were stored vertical – not horizontal.
99” of my work was wood panels – so I did not need much space for lumber storage.
of course this will not work if you have an eight foot ceiling.
this is similar to what I had with the back part closed in for rigidity.

but of course, this would be the cat’s meow – probably 6 degree angle.


-- Graduated Valedictorian from the University of HardKnocks --

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics