LumberJocks

Rikon 10-324 Bandsaw Bent Fence?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by OX1574 posted 02-27-2018 04:17 AM 336 views 0 times favorited 4 replies Add to Favorites Watch
View OX1574's profile

OX1574

18 posts in 908 days


02-27-2018 04:17 AM

i just recently started resawing with my Rikon bandsaw and noticed the fence is not at 90 degrees vertically with the table top. The top half of the fence is closer to the blade than the bottom half. It’s like the fence is bent at a slight angle towards the blade. Am I missing something, or is there a way to adjust that angle?

Thanks


4 replies so far

View MrUnix's profile

MrUnix

6891 posts in 2319 days


#1 posted 02-27-2018 04:32 AM

Page 19 in the manual, under the section titled:

ADJUSTING THE FENCE 90° TO THE TABLE

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View OX1574's profile

OX1574

18 posts in 908 days


#2 posted 02-27-2018 04:44 AM

Hah…I read that in the manual 3 or 4 times and now I understand what it’s saying. I was thinking that was only for making the fence parallel to the blade the whole length of the fence by adjusting the screws. I forgot the hole is bigger and you can move the screws up and down. Thanks!

View Steve's profile

Steve

607 posts in 703 days


#3 posted 02-27-2018 03:18 PM

How do you like that 10-324? What material are you resawing?

debating between the 324 and the 326 for their sale next month.

View OX1574's profile

OX1574

18 posts in 908 days


#4 posted 02-27-2018 08:11 PM

I have loved it so far. Resawing oak, maple, cherry, walnut, etc.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com