LumberJocks

glue block question

  • Advertise with us

« back to Woodturning forum

Forum topic by Karda posted 02-16-2018 10:05 PM 319 views 0 times favorited 2 replies Add to Favorites Watch
View Karda's profile

Karda

1115 posts in 581 days


02-16-2018 10:05 PM

I want to return a couple small bowls i did, I will use hot glue. how much glue contact do I need will a half inch or so be sufficient or do i need full bottom coverage. The work will be mostly finish work and sanding thanks


2 replies so far

View walnutles's profile

walnutles

13 posts in 225 days


#1 posted 02-17-2018 07:41 AM

I glue all around the rim if I’m sanding the base or removing the chucking point as it makes removing the glue easyier to remove and for the inside of the bowl and the edge of the bowl I use different sized plate shapes of wood to fit different sized bowls that have a chucking points on them and that I can glue to the base of the bowl.

https://s3.amazonaws.com/vs-lumberjocks.com/p4aaoqd.jpg!

I found that if you put a dollop of hot melt glue on the base of your bowl and stick it to some wood its a nightmare to get the bowl off and the glue off. Les

View Karda's profile

Karda

1115 posts in 581 days


#2 posted 02-17-2018 09:57 PM

ok thanks

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com