LumberJocks

Cabinet drawer slides

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by JCamp posted 02-15-2018 11:24 PM 414 views 0 times favorited 7 replies Add to Favorites Watch
View JCamp's profile

JCamp

626 posts in 573 days


02-15-2018 11:24 PM

Topic tags/keywords: resource

I’m building new drawers for an old vanity that currently only has one and this is the first time I’m dealing with drawer slides. They are bottom mount The piece on the drawer is 19 inches and the piece in cabinet looks lik it’s 19-1/2 (mayb 20 since it goes into a plastic bracket in the back of the cabinet) My question is am I correct to order the 20 inch slides?
Where do u folks buy them at? I’ve found some on amazon but I’m not opposed to ording them from somewhere else.

-- Whatsoever thy hand findeth to do, do it with all thy might


7 replies so far

View cabmaker's profile

cabmaker

1735 posts in 2831 days


#1 posted 02-16-2018 12:37 AM

Are they mono rail guides ?

Don’t know if your correct or not

If they are the monorail guides,,,,,,you can get 22 in and hacksaw em if your unsure of length

And the back bracket is very forgiving as the guide can slide in or out approx 1 1/4 inch if i remember correctly

I have not used that type for 35 or so years,,,,,with exception to RV cabinetry,,,,,,commonly used there

View Rich's profile

Rich

2962 posts in 612 days


#2 posted 02-16-2018 06:24 AM

There are loads of sites selling drawer slides. https://www.woodworkerexpress.com is my first stop since their prices generally are good, and service is excellent.

I can’t tell from your post if you already bought slides or not. If you haven’t, Blum are pretty hard to beat. Full extension Blumotion cost a little more, but they are such high quality.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View JCamp's profile

JCamp

626 posts in 573 days


#3 posted 02-16-2018 11:23 PM

I appreciate the advice guys. I looked at the website provided but in the end up going to ave heardwear and getting some 22 inch slides and cutting them down. They worked like a charm. Thanks guys

-- Whatsoever thy hand findeth to do, do it with all thy might

View AlmostRetired's profile

AlmostRetired

211 posts in 736 days


#4 posted 02-17-2018 12:35 AM

I have read multiple places that Wurth Woodworks has really good slides for great prices.

Roger

View Rick's profile

Rick

9701 posts in 3055 days


#5 posted 02-18-2018 11:01 PM

Double Post Forget his one. The one below SHOULD Work

-- LIFE is what happens when you're planning on doing Other Things!

View Rick's profile

Rick

9701 posts in 3055 days


#6 posted 02-18-2018 11:05 PM

Lee Valley Drawer Slides.

LINK: http://www.leevalley.com/us/hardware/Search.aspx?action=n&ap=

-- LIFE is what happens when you're planning on doing Other Things!

View Rick's profile

Rick

9701 posts in 3055 days


#7 posted 02-18-2018 11:14 PM

Bad Link. Forget this one.

-- LIFE is what happens when you're planning on doing Other Things!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com