table saw router and outfeed table

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Jeff82780 posted 04-09-2011 05:39 PM 5707 views 0 times favorited 6 replies Add to Favorites Watch
View Jeff82780's profile


204 posts in 2989 days

04-09-2011 05:39 PM

Not sure if I want a router or just an extension for my Grizzly G0715P Table saw. I already have a router table(not the best, but it works) but its always nice to have an extra.Or do you guys think it would just be a pain in the a$$. However, my question is….............How do I bolt the table down? Will I have to drill holes in the rails? Thats what I figured I would do, but i dont wanna start drilling holes in my rails to later find out that I didn’t have too. Does anyone know of any good websites or have pictures for ideas. I browsed the website and did find a few, but more is better. Thanks!!!!!!


6 replies so far

View JasonWagner's profile


527 posts in 3175 days

#1 posted 04-09-2011 06:01 PM

I have a Grizzly router wing on my saw and stock it was OK but I have made it work great. The router attachment is pretty basic but does hold firmly. I had to add my own fence and miter slot. The new wing they offer looks a lot more fancy but also costs a lot. I was looking at the Bench Dog wing for a little while and it gets good reviews. To make your own I wouldn’t stress too much about putting holes in the rails. You could add a ledge to the inside of the rails with the possibility of removing or replacing the router table with an extension. You can make your own router wing and plate or just make the wing to fit a store bought plate (more expensive but a nicer and longer lasting option). Check out my two projects related to table saw router wings and fences.

-- some day I hope to have enough clamps to need a clamp cart!

View Jeff82780's profile


204 posts in 2989 days

#2 posted 04-10-2011 03:39 PM

THANKS for the reply Jason. When to talk about adding a ledge, what exactly do you mean?

View Jeff82780's profile


204 posts in 2989 days

#3 posted 04-11-2011 03:03 AM

i imagine the grizzly would fit my tablesaw, but I would like to make one instead

View tedth66's profile


458 posts in 3185 days

#4 posted 04-11-2011 05:21 AM

I put one at the end of my tablesaw and didn’t need to drill into the rails. The Sawstop has angle iron mounted to the rails that typically held up the phenolic extensions. I just used them to hold up the router table that I made.

Here’s the link showing the router side of the table.

-- Ted

View zzzzdoc's profile


550 posts in 2998 days

#5 posted 04-14-2011 12:42 AM

Here’s mine. Should look a lot like Ted’s ;)

I did drill into the rails for mine. Didn’t enjoy doing it, but it worked out fine.

-- Before you criticize someone, you should walk a mile in their shoes. That way, when you criticize them, you're a mile away and you have their shoes.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics