Salt Shaker plugs

« back to Power Tools, Hardware and Accessories forum

7 posts in 779 days

779 days ago

Topic tags/keywords: salt pepper shaker plug stopper supply robroy

I have started to turn same nice salt and pepper shakers on the lathe.

I had best luck turning a hole in the bottom to fill it with salt. I found some
plastic plugs a hobby cermic supply shop. However they only had a few left and I
purchased what they had. I like these better than the rubber ones.

They are made by robroy part# 630. They are clear plastic plug about 3/4 wide and tapered with a small flange.
I belive they are designed for plugs in pipes during shipment. I found the website for robroy which has several
companies but not able to directly find this part.

I been unable to locate this robroy 630 on the internet. I did find a 632, but no size description.

Does anyone have a source that they can point me toward?

Thanks.

3 replies so far

lew home \| projects \| blog 8979 posts in 1923 days #1 posted 779 days ago	Don’t have a source but I have a bunch of the rubber ones that come with the Woodcraft pepper grinder kits. I don’t use them and you are welcome to them. Lew -- Lew- Time traveler. Purveyor of the world's finest custom rolling pins!
crank49 home \| projects \| blog 2281 posts in 1139 days #2 posted 778 days ago	http://www.mcmaster.com/#push-in-plugs/=bpqx2o This link will take you to McMaster Carr. This company has everything anybody could ever need to build anything. A pretty broad statement, I realize, but go look for yourself. -- Michael :-{\| Diapers and politicians both need to be changed often; and for the same reason.
gazingm42 home \| projects \| blog 7 posts in 779 days #3 posted 778 days ago	Crank, I saw one other place that had caps like this in bags of 1000!!! But 100 is more my size. But my only concern is they are red vs the clear ones that I have on the robroy. Thank for this link as order 100 much better than the 1000. Thanks

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8790
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	220
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	28
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	61
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	78
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1530
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3547
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15767
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2034
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	495
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2837
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	808
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	901
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	766
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2740
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1547
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6156

	Author	Latest activity		New comments or replies since you last checked
How to make it look 100 years old?	Kaleb the Swede	1 minute ago	by chrisstef	sign in to get readership tracking
a different design for a set of stairs	tomakazi	4 minutes ago	by tomakazi	sign in to get readership tracking
scottb2's Profile	scottb2	7 minutes ago	by scrollsaw	sign in to get readership tracking
cj246's Profile	cj246	8 minutes ago	by scrollsaw	sign in to get readership tracking
teresawwarren's Profile	teresawwarren	8 minutes ago	by scrollsaw	sign in to get readership tracking
markrich's Profile	markrich	9 minutes ago	by scrollsaw	sign in to get readership tracking
Georood's Profile	Georood	9 minutes ago	by scrollsaw	sign in to get readership tracking
Townsendenabehu's Profile	Townsendenabehu	9 minutes ago	by scrollsaw	sign in to get readership tracking
condiment carrier	Todd Barrone	9 minutes ago	by BusterB	sign in to get readership tracking
emma quee's Profile	emma quee	10 minutes ago	by scrollsaw	sign in to get readership tracking

Salt Shaker plugs

3 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...