LumberJocks

Hand Tool Forensics #1 - We Have A Winner!

  • Advertise with us

« back to Hand Tools forum

Forum topic by Ron Aylor posted 01-27-2018 07:48 PM 652 views 0 times favorited 26 replies Add to Favorites Watch
View Ron Aylor's profile

Ron Aylor

2631 posts in 669 days


01-27-2018 07:48 PM

Topic tags/keywords: hand tool handtool methods of work forensics mechanisms of injury

Hand tool work can produce some very interesting waste. Like those wonderful paper-thin shavings when a plane iron is set just right. I thought it would be interesting to share photos of interesting waste and see if folks can identify the operation and hand tool that produced said waste. Akin to mechanisms of injury. Seeing an end result and determining the cause.
 
What was I doing, and with what?
 

-- Ron in Lilburn, Georgia.  https://ronaylor.wordpress.com


26 replies so far

View TheTurtleCarpenter's profile

TheTurtleCarpenter

1050 posts in 1088 days


#1 posted 01-27-2018 08:00 PM

How about cutting a curve on board edge with a chisel

-- "Tying shoelaces was way harder than learning to Whistle",,,,,member MWTCA area K. Kentucky

View TheFridge's profile

TheFridge

9603 posts in 1508 days


#2 posted 01-27-2018 08:08 PM

Mortise with chisel? What do we win. Alder? :)

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View Oldtool's profile

Oldtool

2636 posts in 2213 days


#3 posted 01-27-2018 08:19 PM

I loose, no idea.

-- "I am a firm believer in the people. If given the truth, they can be depended upon to meet any national crisis. The point is to bring them the real facts." - Abraham Lincoln

View Ron Aylor's profile

Ron Aylor

2631 posts in 669 days


#4 posted 01-27-2018 08:27 PM



How about cutting a curve on board edge with a chisel

- TheTurtleCarpenter

Close, but no.

-- Ron in Lilburn, Georgia.  https://ronaylor.wordpress.com

View Ron Aylor's profile

Ron Aylor

2631 posts in 669 days


#5 posted 01-27-2018 08:30 PM



Mortise with chisel? What do we win. Alder? :)

- TheFridge

Very close, but no. Alder is too valuable to be the prize in some silly contest … shame on you!

-- Ron in Lilburn, Georgia.  https://ronaylor.wordpress.com

View Ron Aylor's profile

Ron Aylor

2631 posts in 669 days


#6 posted 01-27-2018 08:31 PM



I loose, no idea.

- Oldtool

Now, Tom … really?

-- Ron in Lilburn, Georgia.  https://ronaylor.wordpress.com

View theoldfart's profile

theoldfart

9737 posts in 2473 days


#7 posted 01-27-2018 08:37 PM

Foot powered mortising machine.

-- "With every tool obtained, there is another that is needed" DonW ( Kevin )

View Ripper70's profile

Ripper70

1020 posts in 931 days


#8 posted 01-27-2018 09:01 PM


 
What was I doing, and with what?
 

- Ron Aylor


You were cutting the tops of tiny Trojan Warrior helmets with a well sharpened kopis.

-- "You know, I'm such a great driver, it's incomprehensible that they took my license away." --Vince Ricardo

View Ron Aylor's profile

Ron Aylor

2631 posts in 669 days


#9 posted 01-27-2018 09:21 PM



Foot powered mortising machine.

- theoldfart

Sorry Kevin, no.

-- Ron in Lilburn, Georgia.  https://ronaylor.wordpress.com

View Ron Aylor's profile

Ron Aylor

2631 posts in 669 days


#10 posted 01-27-2018 09:22 PM


 
What was I doing, and with what?
 

- Ron Aylor

You were cutting the tops of tiny Trojan Warrior helmets with a well sharpened kopis.

- Ripper70

DING, DING, DING ….. no. LOL!

-- Ron in Lilburn, Georgia.  https://ronaylor.wordpress.com

View TheTurtleCarpenter's profile

TheTurtleCarpenter

1050 posts in 1088 days


#11 posted 01-27-2018 09:23 PM

Maybe it was a hatchet that was used, those chips are too thick and short for a drawknife.

-- "Tying shoelaces was way harder than learning to Whistle",,,,,member MWTCA area K. Kentucky

View Ron Aylor's profile

Ron Aylor

2631 posts in 669 days


#12 posted 01-27-2018 09:27 PM



Maybe it was a hatchet that was used, those chips are too thick and short for a drawknife.

- TheTurtleCarpenter

No hatchet. The chips are approximately 3/16” thick and 9/32” high.

-- Ron in Lilburn, Georgia.  https://ronaylor.wordpress.com

View TheTurtleCarpenter's profile

TheTurtleCarpenter

1050 posts in 1088 days


#13 posted 01-27-2018 09:44 PM

I guess I was thinking they were larger Ron, nice clue. How about chopping the waste on an end grain rabbet with a chisel

-- "Tying shoelaces was way harder than learning to Whistle",,,,,member MWTCA area K. Kentucky

View JRsgarage's profile

JRsgarage

247 posts in 531 days


#14 posted 01-27-2018 09:48 PM

cutting a dado

-- Two is One, One is None

View Ron Aylor's profile

Ron Aylor

2631 posts in 669 days


#15 posted 01-27-2018 09:54 PM



I guess I was thinking they were larger Ron, nice clue. How about chopping the waste on an end grain rabbet with a chisel

- TheTurtleCarpenter

Gettin’ warmer!

-- Ron in Lilburn, Georgia.  https://ronaylor.wordpress.com

showing 1 through 15 of 26 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com