LumberJocks

Downsizing Shop

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by woodsmithshop posted 01-12-2018 08:44 PM 790 views 0 times favorited 22 replies Add to Favorites Watch
View woodsmithshop's profile

woodsmithshop

1294 posts in 3414 days


01-12-2018 08:44 PM

I am downsizing my shop, it is too small for the tools that I have, I am selling my table saw, drum sander, horizontal belt sander, and a RBI 26” VS scroll saw.

The table saw is a PM66 with 5hp motor, single phase, with 2 cast iron wings, the accessories that must go with it are, an Incra TS fence positioning system, Excalibur Overarm blade guard/dust pickup, an INcra 5000 Miter sled, and a PM Tenon jig. I have a little over $3500 in all of this, I am asking $1500 for the saw and accessories. the saw is in very good to excellent condition. this will have to be a local pickup because of weight.
I do not have picture of 5000 miter sled.

The Drum Sander is a Grizzly 1066 24” dual drum, with Hook and Loop conversion, it also is on mobile rollers it is in very good condition. I am asking $500.

The Horizontal Belt Sander is Enlon, 6” x 36” in good condition.
I am asking $200.

The Scroll Saw is an RBI 226 vs, 26” it has less than 10 hours on it,it is in excellent condition.
I am asking $500.

all of the above must be local pickup.

-- Smitty!!!


22 replies so far

View cabmaker's profile

cabmaker

1661 posts in 2678 days


#1 posted 01-12-2018 09:44 PM

Wow….nice prices on that stuff,,,,should be gone quickly

View lew's profile

lew

11887 posts in 3624 days


#2 posted 01-12-2018 09:56 PM

Great prices, Smitty! A little far for me, however.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

#3 posted 01-13-2018 03:46 AM

Although I’m not quite in an ideal distance from you, I appreciate the eye candy
;-D

-- Lane Custom Guitars and Basses

View Woodmaster1's profile

Woodmaster1

872 posts in 2456 days


#4 posted 01-13-2018 04:41 AM

I would keep the scroll saw because that is something you could use until you can’t do woodworking anymore. You can set sit down and cut until your tired of cutting. You should have no problem getting rid of things great prices.

View Smitty_Cabinetshop's profile

Smitty_Cabinetshop

14941 posts in 2487 days


#5 posted 01-13-2018 06:03 AM

The Drum Sander is a Grizzly 1066 24” dual drum, with Hook and Loop conversion, it also is on mobile rollers it is in very good condition. I am asking $500.

Fascinating. Must consider this one.

-- Don't anthropomorphize your handplanes. They hate it when you do that. -- OldTools Archive --

View TheFridge's profile

TheFridge

8633 posts in 1355 days


#6 posted 01-13-2018 06:06 AM

I wish you were in LA. We could be best friends.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View msinc's profile

msinc

163 posts in 372 days


#7 posted 01-13-2018 02:03 PM



I would keep the scroll saw because that is something you could use until you can t do woodworking anymore. You can set sit down and cut until your tired of cutting. You should have no problem getting rid of things great prices.

- Woodmaster1

I was thinking the same thing….just when you need one the most somebody just bought it!!! On a side note, of course you would have to have a PM66 5hp for sale, outfitted with all the goodies…..why wouldn’t ya’?.....I just bought a brand new PM2000 two seconds ago!!!!!
Might want to post where you are located. Good luck!!!

View Knockonit's profile

Knockonit

204 posts in 71 days


#8 posted 01-13-2018 02:16 PM

Yep, looks like he is in Olney, Illinois

View GR8HUNTER's profile

GR8HUNTER

3099 posts in 581 days


#9 posted 01-13-2018 02:29 PM

a very great price on everything ….but the TS WOW :<))

-- Tony Reinholds,Pa. REMEMBER TO ALWAYS HAVE FUN

View woodsmithshop's profile

woodsmithshop

1294 posts in 3414 days


#10 posted 01-13-2018 02:31 PM

I would keep the scroll saw because that is something you could use until you can t do woodworking anymore. You can set sit down and cut until your tired of cutting. You should have no problem getting rid of things great prices.
- Woodmaster1

I have a 16” EXCALIBUR scroll saw also, it takes up less room, so I am keeping it.

-- Smitty!!!

View Holbs's profile

Holbs

1766 posts in 1898 days


#11 posted 01-13-2018 02:38 PM

I almost would drive to Illinois for a $500 24” drum sander! grr…

-- The Carpenter Bee is derived from the Ancient Greek word wood-cutter

View RPhillips's profile

RPhillips

1140 posts in 1705 days


#12 posted 01-13-2018 02:47 PM

Why do I have to be so broke… great deal on all of those listed.

-- Rob - Indianapolis IN - Learning... one mistake at a time...

View Ripper70's profile

Ripper70

683 posts in 777 days


#13 posted 01-13-2018 04:50 PM

Hmmm. Too far for me to transport all that iron back to my place. D’ya think I could just rent a room in your place and play with all your toys?

I’m quiet as a mouse. Really, I am!

-- "You know, I'm such a great driver, it's incomprehensible that they took my license away." --Vince Ricardo

View woodsmithshop's profile

woodsmithshop

1294 posts in 3414 days


#14 posted 01-13-2018 06:30 PM

Some of you may be wondering why I am selling my beloved PM66, we moved 2 years ago from the country into town, my old shop was 2300 sq ft, my “new” shop is 860 sq ft.I have tried many different ways to incorporate all of my tools, the PM 66 takes up a quarter of the shop, what with the saw plus infeed and outfeed tables, and dust collection fittings, I can’t fit all of it in so it is usable. I have a Delta bench top saw in my son’s basement that I think I can work into my shop. the drum sander is just too big, as is the horizontal belt sander, I do have a Jet 10” drum sander that is sufficient for what I am doing now, it takes up less room than the grizzly. also I have cut down on bigger projects and just doing small things, such as segmented bowls and I just started carving, so I can keep busy enough with those projects.

-- Smitty!!!

View woodsmithshop's profile

woodsmithshop

1294 posts in 3414 days


#15 posted 01-13-2018 06:34 PM

Hey Ripper, it would be a tight squeeze. I guess I could put you in the basement of the outhouse. lol

-- Smitty!!!

showing 1 through 15 of 22 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com