• Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by SCOTTYG posted 03-18-2011 02:15 AM 1138 views 0 times favorited 5 replies Add to Favorites Watch
View SCOTTYG's profile


4 posts in 2045 days

03-18-2011 02:15 AM

I have a Ridgid TS3650 tablesaw and would love some advice on finding the correct aftermarket fence, and rail extensions. Any help appreciated.

-- Scott

5 replies so far

View Cato's profile


693 posts in 2730 days

#1 posted 03-18-2011 12:54 PM

I put a Delta T-2 on my R4511 and have been quite happy with it.

Not sure what you mean about the correct fence unless you are referring to will it bolt on without any drilling modifications. Seems that most people have to drill some holes in the aftermarket rails to filt their particular saw.

View jim C's profile

jim C

1467 posts in 2516 days

#2 posted 03-18-2011 01:52 PM

I have to ask the question….why are you replacing the stock fence?
I have the 3650 and the stock fence is as smooth as butter and extremely accurate. A aftermarket fence would, in my estimation, offer nothing better than the original.

-- When I was a boy, I was told "anyone can be President", now I'm beginning to believe it!

View knotscott's profile


7145 posts in 2793 days

#3 posted 03-18-2011 03:36 PM

The fence for sale in this link is very close to the original stock fence on the 3650. Otherwise the T2 is one of the best bangs for the buck and could be considered an upgrade in some regards.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View lilredweldingrod's profile


2495 posts in 2524 days

#4 posted 03-19-2011 02:20 PM

I have a Ridgid with the T-2. You will love this setup.

View SCOTTYG's profile


4 posts in 2045 days

#5 posted 03-20-2011 03:02 AM

Thanks guys, I was thinking of adding a router table in the empty space to the right of the blade, and thought that if i got longer rails I would be able to use the fence for routing. I also would like the extra range to cut longer stock. I looked at the G9220 from grizzly. It’s a shopfox fence with the 72” front and back rails with the legs for 295.00. Now I’ll go back and look up the T-2, thanks for the input.
I would love a true cabinet saw, but budgets not there. Looking for a happy medium.

-- Scott

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics