Snap hasps for cases

« back to Power Tools, Hardware and Accessories forum

244 posts in 1676 days

798 days ago

Hello all,
I’m looking for a source for snap hasps for a small case I’m going to make. The ones pictured here are way too big. I need them so small that each part is about 3/8” tall, so that together they come to about 3/4”. A hasp is the thing on a suitcase or similar case that keeps the case closed. Hard to describe. Anyway, all the ones I’ve found are much too big for my purposes. I’d appreciate any leads on smaller ones.
Thanks!
Mitch

-- Mitch, http://furnitude.blogspot.com

2 replies so far

HeirloomWoodworking home \| projects \| blog 236 posts in 1909 days #1 posted 798 days ago	Hey Mitch I used these brass cast clasps from Lee Valley for a recent small case project and loved them. Not sure if they will fit your usage but I found them well built and very affordable. Good Luck with your case. Trev -- Trevor Premer Head Termite and Servant to the Queen - Heirloom Woodworking
Furnitude home \| projects \| blog 244 posts in 1676 days #2 posted 797 days ago	Hi Trev, Thanks for the info. Those might just work. Thanks, Mitch -- Mitch, http://furnitude.blogspot.com

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8792
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	222
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	28
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	61
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	80
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1532
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3549
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15782
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2034
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	495
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2841
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	809
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	902
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	766
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2740
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1547
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6158

LumberJocks Pulse

Latest activity	New comments or replies since you last checked
What should I do with these?	Brandon	5 seconds ago	by pintodeluxe	sign in to get readership tracking
Can I flatten this?	muleskinner	45 seconds ago	by redSLED	sign in to get readership tracking
simple sign	sawdustmaker101	1 minute ago		sign in to get readership tracking
Looking at a Ridgid jointer. Is this the right tool?	noone	2 minutes ago	by a1Jim	sign in to get readership tracking
ARABIAN HORSE HEAD	RWAARM	2 minutes ago	by diggerdelaney	sign in to get readership tracking
What type of wooder filler can i use to cover screw heads in pine that won't blotch when varathaned?	Jim Reeves	3 minutes ago	by Jim Reeves	sign in to get readership tracking
Handplanes of your dreams	Bertha	3 minutes ago	by Brandon	sign in to get readership tracking
Shop Stuff #2: Fingernail Gouge Sharpening on the WorkSharp	SPalm	5 minutes ago	by PurpLev	sign in to get readership tracking
Finishing a Maple Crib	Peteyb	5 minutes ago	by redSLED	sign in to get readership tracking
I needed a new marking gauge	parkerdude	7 minutes ago	by Sergio	sign in to get readership tracking

Author

Latest activity

New comments or replies
since you last checked

What should I do with these?

Brandon

5 seconds ago

by pintodeluxe

to get readership tracking

Can I flatten this?

muleskinner

45 seconds ago

by redSLED

to get readership tracking

simple sign

sawdustmaker101

1 minute ago

to get readership tracking

Looking at a Ridgid jointer. Is this the right tool?

noone

2 minutes ago

by a1Jim

to get readership tracking

ARABIAN HORSE HEAD

RWAARM

2 minutes ago

by diggerdelaney

to get readership tracking

What type of wooder filler can i use to cover screw heads in pine that won't blotch when varathaned?

Jim Reeves

3 minutes ago

by Jim Reeves

to get readership tracking

Handplanes of your dreams

Bertha

3 minutes ago

by Brandon

to get readership tracking

Shop Stuff #2: Fingernail Gouge Sharpening on the WorkSharp

SPalm

5 minutes ago

by PurpLev

to get readership tracking

Finishing a Maple Crib

Peteyb

5 minutes ago

by redSLED

to get readership tracking

I needed a new marking gauge

parkerdude

7 minutes ago

by Sergio

to get readership tracking

Snap hasps for cases

2 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...