LumberJocks

Chip/Sawdust Container for Super Dust Deputy

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by hokieman posted 12-26-2017 08:40 PM 608 views 0 times favorited 4 replies Add to Favorites Watch
View hokieman's profile

hokieman

189 posts in 3870 days


12-26-2017 08:40 PM

What kind of wood chip/sawdust container do you use with your Super Dust Deputy? I have seen some folks using a 30 gallon galvanized trash can on YouTube. But I also saw where some guy used this set up and the vacuum collapsed the galvanized trash can. I have a 2hp Grizzly dust collector. Any thoughts?


4 replies so far

View JBrow's profile

JBrow

1366 posts in 1036 days


#1 posted 12-26-2017 11:14 PM

Hokieman,

I took perhaps an unconventional approach to the chip/sawdust collection, figuring it would be easier and faster to empty the debris drum. The fiber drum sets in a sealed box. The cyclone dumps the chips in the drum through a hole in the top of the box. The door is opened and the drum slid out for emptying and back in and the door closed and locked with window sash locks after the drum is emptied. Since the drum is never pressurized, a light-weight drum or even a cardboard box could be used. This photo illustrates the setup…

View shipwright's profile

shipwright

8062 posts in 2914 days


#2 posted 12-26-2017 11:33 PM

No problems with my galv. trash can. I use one in my home shop as well with a 3hp DC. I did collapse a plastic trash can with that one but I have a hard time believing a standard steel trash can being damaged by a small DC.

-- Paul M ..............the early bird may get the worm but it’s the second mouse that gets the cheese! http://thecanadianschooloffrenchmarquetry.com/

View cracknpop's profile

cracknpop

315 posts in 2465 days


#3 posted 12-28-2017 02:23 AM

I built a very similar design as JBrow, enclosed a 33 gal RubberMaid trash can in a plywood box with DustDeputy attached to top of the box.

-- Rick - I know I am not perfect, but I will keep pressing on toward the goal of becoming all I am called to be.

View sawdustjunkie's profile

sawdustjunkie

384 posts in 1833 days


#4 posted 12-28-2017 02:54 AM

I put my Super Dust Deputy on top of a 55 gal plastic barrel. Works as when I am in full build mode, I fill it up in about 5 weeks. I cut a rectangle hole 3/4 of the way from the top and installed a clear plastic window in it so I could see when it is full.

-- Steve: Franklin, WI

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com