Gluing Laminations on Fishing nets

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by milehigh posted 03-03-2011 07:19 PM 1078 views 0 times favorited 1 reply Add to Favorites Watch
View milehigh's profile


57 posts in 3364 days

03-03-2011 07:19 PM

I am in the process of building some fishing nets with four 3/32 to 1/8” thick, 3/4” wide strips for the hoop lamination. I have epoxy, plastic resin, and polyurethane glues. I talked to a net maker and he told me that he was applying Gorilla glue to the strips right out of the steambox and then on to the clamping form. This would obviously save a bunch of time.
The Gorilla website recommended against this to avoid creep. Would these small of strips be prone to creep? Any input from wood benders appreciated


1 reply so far

View Loren's profile


10476 posts in 3672 days

#1 posted 03-03-2011 08:10 PM

The trick with the gorilla glue in that application would be not
to apply too much. Put in too much and it will be all over the
place, but put in just enough and it will stay where you want
it. Of course the darned stuff expands, so you’ve got to plan
for that.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics