LumberJocks

Making tee markers for a golf course

  • Advertise with us

« back to Wood & Lumber forum

Forum topic by phatso posted 12-05-2017 09:32 PM 163 views 0 times favorited 2 replies Add to Favorites Watch
View phatso's profile

phatso

7 posts in 2488 days


12-05-2017 09:32 PM

Our course is going to redo the tee markers for the golf course. There are four sets of tees and 18 holes so 72 markers will be done. We will be using felled branches that we will be cutting into 5-8 inch sections and them painting the “bare” wood ends with colors to indicate the proper tee position. My question is; can you give me any advise on stabilizing the wood. I assume that the paint will seal the ends, but should the bark be covered with some sort of sealer?

thanks

Bob

-- the older i get the better i used to be


2 replies so far

View cabmaker's profile

cabmaker

1621 posts in 2645 days


#1 posted 12-07-2017 02:26 PM

Bob …..I don’t think i would put too much effort in trying to preserve markers made from felled trees…..painted ends is probably plenty.

View phatso's profile

phatso

7 posts in 2488 days


#2 posted 12-07-2017 03:54 PM



Bob …..I don t think i would put too much effort in trying to preserve markers made from felled trees…..painted ends is probably plenty.

Thanks cabby….....I thought as much and that simplicity would be great with me. Painting the ends of 144 markers would be a lot easier and more practical and LESS EXPENSIVE than trying to put outside oilon them!!! :)

- cabmaker


-- the older i get the better i used to be

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com