LumberJocks

Looking for a Brand

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by ScrapArt posted 1241 days ago 1182 views 1 time favorited 18 replies Add to Favorites Watch
View ScrapArt's profile

ScrapArt

48 posts in 1289 days


1241 days ago

Topic tags/keywords: question

Does anybody make are know how to make a Brand. I want to have to to brand my work. Need cheap because the Name will most likely change

-- Please print this communication...Save Lumber jacks job


18 replies so far

View canadianchips's profile

canadianchips

1831 posts in 1595 days


#1 posted 1241 days ago

http://brandingirons.com/
Not sure what the cost is ?

-- "My mission in life - make everyone smile !"

View rivergirl's profile

rivergirl

3198 posts in 1436 days


#2 posted 1241 days ago

Lee Valley has some inexpensive ones, I was just looking at them last night.

-- Homer : "Oh, and how is education supposed to make me feel smarter? Besides, every time I learn something new, it pushes some old stuff out of my brain."

View Jonathan's profile

Jonathan

2603 posts in 1648 days


#3 posted 1241 days ago

Although I have not yet ordered from them, Brand-First appears to be a good source, with attractive pricing, as well as a nice selection. I found out about them from another LJ and will likely order my next branding iron from them.

-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."

View crank49's profile

crank49

3337 posts in 1569 days


#4 posted 1240 days ago

I used to be an engineer/project manager for a fabrication/welding/machining type company. I cut some branding irons for a few customers using a CNC plasma cutting table. They cost about $50 made in stainless steel and were the type you heat in a fire or similar heat source. A machine shop with a CNC mill could do the same thing, but in our case the cost would have been more. You might check similar sources.

The “Brand-First” and “Brandingirons” links above are a little more specific to what I think you want, however. Brand-First especially seems to have some good pricing for what they offer. The “non-electric” branding tool at Lee Valley, suggested by rivergirl looks good also. Looks like any way you slice it the cost of a branding iron is going to be at least $50 to $110 on the low end.

-- Michael :-{| “If you tell a big enough lie and tell it frequently enough, it will be believed.” ― A H

View ScrapArt's profile

ScrapArt

48 posts in 1289 days


#5 posted 1240 days ago

Thank you

-- Please print this communication...Save Lumber jacks job

View lightswitch's profile

lightswitch

7 posts in 1241 days


#6 posted 1240 days ago

Haven’t used them before but was just noticing that Highland has a whole category of items related to branding and personalization:

http://www.highlandwoodworking.com/personalize-woodworker.aspx

View SouthpawCA's profile

SouthpawCA

254 posts in 1831 days


#7 posted 1240 days ago

Whatever you do …. DO NOT BUY A ROCKLER branding iron!!! The base is 13/64” (that’s less than 1/4”) and the first time I tried to use the one I got for Christmas it warped to such a point that made it useless. I can’t get a clean burn on anything. It’s either burned to a point or so light the lettering can’t be read. They told me I have to roll it around. THAT’S BS! Doing that I the lettering is not crisp at all.

-- Don

View Jonathan's profile

Jonathan

2603 posts in 1648 days


#8 posted 1240 days ago

I would have to agree with you, Don. I also purchased a Rockler branding iron last year and have not been happy with it. I do, in fact, have to roll it around to get anywhere near consistent burn-in. I believe mine was like this when it was made, just slightly “off”. Your technique has to be just right to get it to look decent. It’s useable, but I’d prefer not to have to go through the above ritual every time I want to use it. (That is also the reason I obviously didn’t recommend the Rockler iron in my original posting.) I also wish it had a longer cord.

-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."

View Brandon 's profile

Brandon

191 posts in 1265 days


#9 posted 1240 days ago

I also have been looking for a brand but with my logo.

-- An investment in knowledge pays the best interest. Benjamin Franklin

View childress's profile

childress

841 posts in 2140 days


#10 posted 1239 days ago

I bought from Custom Branding Irons. Terry owns and operates the business and is very easy to work with and talk to. He provides his direct number and either answers the phone or calls you back very quickly. The first custom brand he made for me (a drill press one) had a slight warp in it and when I contacted him about it, there was no questions asked, he made me a new one and had it in the mail a week later! Great guy and I’m about to place another order with him….

-- Childress Woodworks

View Nazair's profile

Nazair

43 posts in 1254 days


#11 posted 1235 days ago

Call the Vet you use, they’ll know a horse shoer, or how ever it’s spelled, lol. He’ll know how or who to guide you too.

-- Naz

View Dandog's profile

Dandog

249 posts in 1372 days


#12 posted 1235 days ago

if I can get the image is reversed I think I could pull it off. is there a way to do that on the computer?maybe taking a picture of it in a mere?I got a think about this. 75 bucks {custom branding irons}
seems like a pretty good deal. It would definitely take some time.

-- life an woodworking is one big experiment

View TopamaxSurvivor's profile

TopamaxSurvivor

14589 posts in 2274 days


#13 posted 1235 days ago

You could just use a runnin’ iron; ie, wood burner. Cheapest and most versitile I can think of;-)

-- "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View FatScratch's profile

FatScratch

189 posts in 1901 days


#14 posted 1234 days ago

I will throw out an endorsement for Custom Branding Irons, noted above. My wife got me a custom brand with my signature in Nov. 2010. It works great and the service was excellent. The brands are all one of a kind and Terry will work with you to design something to your liking. It was a great company to deal with.

View blockhead's profile

blockhead

1450 posts in 1906 days


#15 posted 1231 days ago

I bought one from Rockler a few months ago and have been very pleased with it. I do agree that the cord could be longer, but no biggie. I certainly don’t need to roll it around, thankfully. Maybe the others got a dud. Or, maybe they messed up on mine and got it right. :-)

-- Brad, Oregon- The things that come to those who wait, may be the things left by those who got there first.

showing 1 through 15 of 18 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase