Another Rip Fence Post

« back to Power Tools, Hardware and Accessories forum

lovinmrv

home | projects | blog

101 posts in 3028 days

03-01-2011 01:48 PM

OK, I have to decide which fence I want to buy.

I have a delta saw mounted in this table:

http://www.flickr.com/photos/lovinmrv/4488432051/

And, I can buy a used 54” biesmeyer clone by Powermatic in really good shape for $200, or a T-Slots kit from Futura Industries for about $340.

Which one would you buy?

Thanks

-- Life is a sales job.

2 replies so far

knotscott home \| projects \| blog 7984 posts in 3344 days #1 posted 03-01-2011 07:39 PM	I’d definitely go with the Biese clone because I’m familiar with it. I’ve got a Jet Exacta II that’s the same as the current PM fences…it’s very similar to the Biese Commercial fence, and I like it equally as well as the Biese. -- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....
lovinmrv home \| projects \| blog 101 posts in 3028 days #2 posted 03-02-2011 01:36 PM	Thanks, Scott. That’s what I thought. -- Life is a sales job.

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	12033
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	2108
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	431
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	340
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1370
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	4907
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	6697
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	28069
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	212
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	5413
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1420
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	6234
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1388
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2154
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1187
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	4759
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2201
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	8847

	Author	Latest activity	New comments or replies since you last checked
Mobile Base for Sawstop ICS/CB?	PatrickIrish	04-26-2018 01:21 PM	sign in to get readership tracking
Stumpy Nubs Woodworking Journal- A truly unique online publication (part 4)	StumpyNubs	04-26-2018 01:16 PM	sign in to get readership tracking
Work piece has dry spots after Tung oil coatings	BryanJP	04-26-2018 01:15 PM	sign in to get readership tracking
Wow what a bummer	chris6453	04-26-2018 01:15 PM	sign in to get readership tracking
Help with joint choice and layout	BadHorse	04-26-2018 01:14 PM	sign in to get readership tracking
Needing Hard Maple for Benchtop	hankerdwn	04-26-2018 01:14 PM	sign in to get readership tracking
Spring 2018 Box Swap	Dave Polaschek	04-26-2018 01:12 PM	sign in to get readership tracking
Camphor Burl Hybrid Cast Duck Call	Darryl Jones	04-26-2018 01:11 PM	sign in to get readership tracking
WINTER WOOD BURNING PROJECT	Ram5703	04-26-2018 01:10 PM	sign in to get readership tracking
need table saw advice	Karda	04-26-2018 01:06 PM	sign in to get readership tracking

Another Rip Fence Post

2 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...