LumberJocks

Unisaw fence for sale SOLD SOLD

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by Paul posted 02-16-2011 10:25 AM 2607 views 0 times favorited 8 replies Add to Favorites Watch
View Paul's profile

Paul

224 posts in 2913 days


02-16-2011 10:25 AM

Tag still on it. It’s sitting in my attic and so it’s no use to me.
There’s three pipes to this fence. I don’t know if there should be a fourth or not. I don’t believe one fell out of the box. I’m sure the’re guys in here who can answer that.
first reasonable offer can have it. If you’re not close you’ll have to pay the shipping.

BTW what is the long bolt for?


8 replies so far

View anchorwood's profile

anchorwood

1 post in 2117 days


#1 posted 02-17-2011 05:26 AM

Hi,
Are you sure that is for a Unisaw and not another Delta model? I’m looking for a fence but this one doesn’t look like the steel fence on my Unisaw; looks more like extruded aluminum. Also, a Unisaw fence would be for a 27 inch deep table and fit 1 and 3/8 inch guide bars (pipes)? Does yours meet those dimensions?
You can reply to me at strobewest@aol.com if you like.
Rog

View Brrman's profile

Brrman

60 posts in 2134 days


#2 posted 02-17-2011 05:32 AM

Looks really similar to what came with my ‘87 Unisaw. My fence is aluminum like that.

-- "Being a perfectionist does not make one perfect..."

View Paul's profile

Paul

224 posts in 2913 days


#3 posted 02-17-2011 06:30 AM

Brrman,
that is correct. My Unisaw is from the mid eighties.
Anchorwood,
Your measurements on the table and rails are correct to what I have here. This is a Unisaw fence, brand new.

View cabmaker's profile

cabmaker

1506 posts in 2270 days


#4 posted 02-17-2011 06:44 AM

That is for sure for a 27 inch table. Early ones were steel. The first aluminum I saw was in about 89-90. I had to buy a replacement and thats what I got. I was told at the time the steel was no longer made. That is a jet-lock fence. Very dependable and takes its share of abuse.

View bratliwj's profile

bratliwj

2 posts in 2112 days


#5 posted 02-23-2011 01:56 PM

Paul, is the fence still for sale? I would be interested in it. You can reply to me at wbratlien@cox.net. Thanks.

View Paul's profile

Paul

224 posts in 2913 days


#6 posted 02-23-2011 07:52 PM

Still available

View Paul's profile

Paul

224 posts in 2913 days


#7 posted 02-24-2011 03:44 AM

There has been a lot of interest in this fence but mostly guys looking for a specific piece of it. It’s complete and I don’t want to break it up. I would like to sell it to a guy who wants a brand new complete fence. If you are interested in the whole fence including screws in the original packages I will sell it at 175 dollars plus shipping.

View bluplanet's profile

bluplanet

37 posts in 2124 days


#8 posted 02-28-2011 06:44 PM

That’s called a “Jet-lock” fence. I believe Delta kept using them on contractor’s saws for quite a while after they stopped using them on Unisaws. They weren’t known for being very accurate but they’re built solid.

I believe the bolt attaches to the back end of the frame that holds the arbor. It sticks out the back end of a Contractor’s saw and pivots as you tilt the blade. The angle bracket attaches to the end of the bolt with the flange and the back end of a blade guard attaches to that.

I’ve got the same parts in my garage except mine are old and getting rusty. I took them off my Korean knock-off of a Delta contractor’s saw years ago when added a 2hp Baldor motor and a fence taken off a JET table saw that I got from a guy who was switching to a Biesmeyer. I also added a cast iron wing from a Delta saw that I picked up for free and made a wide wing for the other side out of aluminum plate. It has a mounting hole in the center for my router.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com