KREG Router Reducer Ring

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by yellowviper posted 02-06-2011 11:50 PM 1290 views 0 times favorited 2 replies Add to Favorites Watch
View yellowviper's profile


7 posts in 2719 days

02-06-2011 11:50 PM

Topic tags/keywords: question

I am going to make some raised panel doors with my new Kreg Precision Router Table. I have the Trition
3 1/4 hp Router mounted under the table. My question is the reducer rings that come with the Kreg table are two different sizes. If I am using a panel raising bit and I will need a larger opening reducer ring. Any advise thanks in advance.

2 replies so far

View cabs4less's profile


235 posts in 2791 days

#1 posted 02-07-2011 01:22 AM

i ust leave the rings out with mine i use a jessem and my panel bit is to large for any of the rings i have so i just rout wit out one theyre just thier for safer operation with smaller parts

-- As Best I Can

View DylanC's profile


204 posts in 2704 days

#2 posted 02-07-2011 04:44 AM

If the opening in the table is too small for the bit (even with the inserts removed) you can pick up a peice of polycorbonate (Lexan) and make a custom table insert. Thick polycarbonate might be hard to find locally, but you can always order from McMaster for under $15.


-- Dylan C ...Seems like all ever I make is sawdust...

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics