LumberJocks

Table saw link belt punched when raising blade

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by LucasWoods posted 10-14-2017 04:08 PM 427 views 0 times favorited 5 replies Add to Favorites Watch
View LucasWoods's profile

LucasWoods

445 posts in 1476 days


10-14-2017 04:08 PM

So yesterday I raised my blade up all the way and went to turn my Grizzlt G1022 table saw on to do a nickel test and slight smoke started to come out of the cabinet and the arbor wouldn’t spin.

Come to find out when I raised the blade up all the way (roughly 3 1/8th depth of cut) the link belt would get pinched between the underside of the TS top and the pulley.

What can I do to resolve this? Reposition the motor a little lower on the motor support so there is a slightly higher angle?

In order for the link belt to not get pinched I have to sacrafice about a 1/4 inch of cut depth (maybe a little less)

Solutions?

-- Colorado Springs, CO - USAF


5 replies so far

View Woodknack's profile

Woodknack

12369 posts in 2523 days


#1 posted 10-14-2017 04:34 PM

The green link belts are wider than red link belts and ride higher on the pulley. So you probably need a red belt. Check width and everything before buying but that’s probably it.

-- Rick M, http://thewoodknack.blogspot.com/

View LucasWoods's profile

LucasWoods

445 posts in 1476 days


#2 posted 10-14-2017 04:40 PM

Thank you!

-- Colorado Springs, CO - USAF

View LucasWoods's profile

LucasWoods

445 posts in 1476 days


#3 posted 10-14-2017 04:47 PM

Does HF carry them?

-- Colorado Springs, CO - USAF

View Woodknack's profile

Woodknack

12369 posts in 2523 days


#4 posted 10-14-2017 05:08 PM

No. The HF is 1/2” (I think) and you probably need a 3/8” (measure your old belt if you have it). I just checked on Amazon and they have 3/8” green belts so ignore my remark about color.

-- Rick M, http://thewoodknack.blogspot.com/

View LucasWoods's profile

LucasWoods

445 posts in 1476 days


#5 posted 10-14-2017 05:14 PM

Ok

-- Colorado Springs, CO - USAF

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com