LumberJocks

Domestic burls needed

  • Advertise with us

« back to Wood & Lumber forum

Forum topic by LogsToLumber posted 1271 days ago 1482 views 0 times favorited 19 replies Add to Favorites Watch
View LogsToLumber's profile

LogsToLumber

4 posts in 1959 days


1271 days ago

We are looking for suppliers of domestic burls - all species

-- Mike Kelly, Indiana www.logstolumberexotics.com


19 replies so far

View stockmaker's profile

stockmaker

160 posts in 1250 days


#1 posted 1237 days ago

I have some oregon big leaf maple burl, also mim getting ready to cut a burl that is over 8ft in dia, are you intrested in fresh cut burl?

View LogsToLumber's profile

LogsToLumber

4 posts in 1959 days


#2 posted 1237 days ago

Yes we are interested in fresh cut – 8 ft in diameter is a whole lot larger than we can manage. A burl that has one measurement of max 26” is the largest we need but on the other side of that we do take the smaller ones as well.
How much a lb are you asking FOB your location?
Mike

-- Mike Kelly, Indiana www.logstolumberexotics.com

View stockmaker's profile

stockmaker

160 posts in 1250 days


#3 posted 1237 days ago

Hi mike, could you use some table tops cut 4in thick of the sizes you need? Also if this 8ft burl im getting ready to cut is hollow, could i rip some burl lumer for you? or are you looking for the whole burl?you say 26in dia but how tall of burl? Im just trying to see what you need

View Roper's profile

Roper

1348 posts in 2314 days


#4 posted 1237 days ago

Hey stockmaker would you be interested in senting some burl caps out to Colorado? we don’t get to many out here.

Roper

-- Roper - Master of sawdust- www.roperwoodturning.com

View Garry's profile

Garry

64 posts in 2853 days


#5 posted 1237 days ago

I have some black cherry burls I may let go depending on the offer.

-- Garry, Engadine, Michigan (Upper Peninsula)

View LogsToLumber's profile

LogsToLumber

4 posts in 1959 days


#6 posted 1237 days ago

Garry & stockmaker – Please contact me through my website www.logstolumberexotics.com

-- Mike Kelly, Indiana www.logstolumberexotics.com

View Ken90712's profile

Ken90712

14821 posts in 1790 days


#7 posted 1237 days ago

Theres a member here http://lumberjocks.com/OregonBurls

or you can contact Rob at www.tulepeaktimber.com Both could help you.

-- Ken, "Everyday above ground is a good day!"

View stockmaker's profile

stockmaker

160 posts in 1250 days


#8 posted 1233 days ago

Im going to cut lots of big leaf maple burl caps, from 4in to 16in to full burls and burl table slabs, anyone intrested they are very reasonable. I would post pics but most people like them green,either way they are coming out soon.

View Roper's profile

Roper

1348 posts in 2314 days


#9 posted 1233 days ago

Please keep me in mind Stockmaker.

-- Roper - Master of sawdust- www.roperwoodturning.com

View dirkflournoy's profile

dirkflournoy

7 posts in 818 days


#10 posted 818 days ago

Hello, I have a burl I’m about to cut down, and need to know the best way to cut and to tell what kind of wood it is. It might be elm? Here are some pic’s

View Joseph Jossem's profile

Joseph Jossem

344 posts in 869 days


#11 posted 818 days ago

Nice tree those are growths certain name ambroseia they grow off narra here.?? not sure the name/Burl is the roots etc. Last burl I saw took a front end loader to move and my truck and triple axle said no way burls are crazy weight.

View dirkflournoy's profile

dirkflournoy

7 posts in 818 days


#12 posted 817 days ago

Hi, Joseph. Thanks for the info. Can you tell me more about burls.

View McKinneyMike's profile

McKinneyMike

79 posts in 1262 days


#13 posted 817 days ago

Joseph, Here in the USA that tree is loaded with burl! Root balls and burls are two different animals. You can find burl in root balls, but burls can occur anywhere on a tree. The tree in the photo has the chance to be very special as the burl looks like it encompasses the entire trunk. Small burls that grow here and there on a tree are usually shallow (they do not extend into the trunk past its surface). When a tree seems to be all burl, as this tree does, it often will extend well into the trunk. Just want to clarify this for all that might not know the common terminology.

-- McKinney Hardwood Lumber --Specializing in exotic and figured hardwood lumber http://www.mckinneyhardwoods.com -McKinney, TX

View Joseph Jossem's profile

Joseph Jossem

344 posts in 869 days


#14 posted 817 days ago

The majority of Burls I have found are in the root system .I have found from personal experience that burls are a part of a injury, decay, bug ,genetics,or old growth factor.the old growth ones are the ones to keep a eye out for in 16 years I have seen 3 only.By the looks of the picture the branches are completely bug eaten good sign what is below.Dirk if possible run a saw straight acroos the bottom dig out around to go as low as possible.If the base is solid you might be in luck.IF you have the equipment dig it out whole.The picture of the log is mango that burl was a abug defect the other is a lychee leg on a table I just finished that is old growth.

View dirkflournoy's profile

dirkflournoy

7 posts in 818 days


#15 posted 816 days ago

To Mike and Joseph,
Thank you for all yuour valuable information. I have just one question. Do I cut it off at the base or dig out the whole stump with the trunk
Dirk

showing 1 through 15 of 19 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase