LumberJocks

Tool gloat! Delta X5 Unisaw!

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by William Shelley posted 09-22-2017 07:05 PM 1304 views 0 times favorited 49 replies Add to Favorites Watch
View William Shelley's profile

William Shelley

477 posts in 1304 days


09-22-2017 07:05 PM

A friend of mine works at a large shop/factory that was getting rid of six Delta Unisaws, as they had replaced everything with SawStops in an attempt to curb employee injuries. I got one for $700, it has a new 3HP single-phase motor (less than 6 months old), 52” beisemeyer fence, and over-arm dust collection / blade guard setup. It’s unfortunately not the newest generation with both handwheels on the front, but it should be a huge step up from the Ridgid R4512 that I’ve had up to this point.

-- Woodworking from an engineer's perspective


49 replies so far

View WayneC's profile

WayneC

13751 posts in 3932 days


#1 posted 09-22-2017 07:30 PM

Awesome. Welcome to the club. :)

-- We must guard our enthusiasm as we would our life - James Krenov

View shipwright's profile

shipwright

7779 posts in 2633 days


#2 posted 09-22-2017 07:39 PM

I have exactly that saw and I love it. You should be pleased, great price.
The only thing that could improve it would be if it had a unifence ….. love my unifence!

-- Paul M ..............If God wanted us to have fiberglass boats he would have given us fibreglass trees. http://thecanadianschooloffrenchmarquetry.com/

View papadan's profile

papadan

3584 posts in 3203 days


#3 posted 09-22-2017 07:52 PM

Nice saw and good price. That sucker is as big as my shop.LOL

View splintergroup's profile

splintergroup

1694 posts in 1057 days


#4 posted 09-22-2017 07:53 PM

You suck! (congrats! that is quite the deal)

Any idea why the motor needed replacing?

First thing I would do is to level the tables to each other and then do a complete squaring and setup.

View jonah's profile

jonah

1447 posts in 3133 days


#5 posted 09-22-2017 07:53 PM

I didn’t realize they made the X5 in right tilt.

Nice score either way.

View William Shelley's profile

William Shelley

477 posts in 1304 days


#6 posted 09-22-2017 07:56 PM



You suck! (congrats! that is quite the deal)

Any idea why the motor needed replacing?

First thing I would do is to level the tables to each other and then do a complete squaring and setup.

- splintergroup

Not sure about the history on the motor. Could have gotten sawdust in the centrifugal switch and they just swapped it out rather than repairing? Often times commercial shops are willing to trade $$$ for time on things like that. I should ask though…

It definitely needs to be gone through, also I will probably have to disassemble it to be able to get it out of my van without a forklift (they loaded it with a forklift). It tipped over in the van when my load straps failed and I don’t think anything was damaged but still needs a run-through.

-- Woodworking from an engineer's perspective

View bobasaurus's profile

bobasaurus

3353 posts in 3019 days


#7 posted 09-22-2017 08:55 PM

I dream of having a saw like that, well done. How did you move the thing?

-- Allen, Colorado (Instagram @bobasaurus_woodworking)

View Mainiac Matt 's profile

Mainiac Matt

7456 posts in 2163 days


#8 posted 09-22-2017 08:57 PM

Congrats…

I think you’ll like having a right tilt saw.

-- Pine is fine, but Oak's no joke!

View William Shelley's profile

William Shelley

477 posts in 1304 days


#9 posted 09-22-2017 09:05 PM



I dream of having a saw like that, well done. How did you move the thing?

- bobasaurus

I recently bought a big 14’ chevy P30 step van (think: FedEx / FritoLay / UPS delivery truck), it has a roll-up door in the back and the shop I bought it from lifted it with a forklift, and two other guys got in the van and the three of us drug it off the pallet. I haven’t gotten it out of the van yet… that’s going to be an adventure.


Congrats…

I think you ll like having a right tilt saw.

- Mainiac Matt

Honestly I don’t really know if it’ll make a lot of difference to my workflow. My Ridgid R4512 was a left-tilt but the fence has about 15” to the left of the blade so sometimes I’d move the fence to the other side for some cuts. For the projects I’ve worked on in the past, I haven’t done a lot of ripping at anything other than 90 degrees.

-- Woodworking from an engineer's perspective

View firefighterontheside's profile (online now)

firefighterontheside

16910 posts in 1691 days


#10 posted 09-22-2017 09:12 PM

That’s a great price. I bid on one in an auction a few weeks ago. I gave up when it went to $1200… well I gave up long before that.

-- Bill M. "People change, walnut doesn't" by Gene.

View MrUnix's profile (online now)

MrUnix

5986 posts in 2034 days


#11 posted 09-22-2017 09:17 PM

Getting it out of the truck is dirt simple (and you have gravity helping you)... take off the fence and extension wings, put down a couple 2by’s as a ramp (2×8, 2×10, 2×12 – whatever you got) and it will slide right out. They are not all that heavy. After you have it on the ground, you can easily move it around with a handtruck or dolly. You can do it by yourself, but it helps to have a second pair of hands to keep it from tipping as you slide it down.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View William Shelley's profile

William Shelley

477 posts in 1304 days


#12 posted 09-22-2017 09:21 PM



Getting it out of the truck is dirt simple (and you have gravity helping you)... take off the fence and extension wings, put down a couple 2by s as a ramp (2×8, 2×10, 2×12 – whatever you got) and it will slide right out. They are not all that heavy. After you have it on the ground, you can easily move it around with a handtruck or dolly. You can do it by yourself, but it helps to have a second pair of hands to keep it from tipping as you slide it down.

Cheers,
Brad

- MrUnix

Yep, this thing is nowhere near as ridiculous and heavy as my Baileigh 16” jointer/planer, which was pushing 1200lbs including the pallet.

-- Woodworking from an engineer's perspective

View Redoak49's profile

Redoak49

2890 posts in 1823 days


#13 posted 09-22-2017 09:42 PM

Nice looking saw

View waho6o9's profile

waho6o9

8027 posts in 2411 days


#14 posted 09-22-2017 09:43 PM

Very nice

View DS's profile

DS

2821 posts in 2255 days


#15 posted 09-22-2017 11:04 PM

That thar’s a keeper! Nice!
(I cut my teeth on one very much like that one.)

It will be worth whatever you need to invest to get it in top shape.
Congrats!

-- "Hard work is not defined by the difficulty of the task as much as a person's desire to perform it.", DS251

showing 1 through 15 of 49 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com