LumberJocks

Labeling my projects

  • Advertise with us

« back to Designing Woodworking Projects forum

Forum topic by toolie posted 09-22-2017 06:35 PM 475 views 0 times favorited 6 replies Add to Favorites Watch
View toolie's profile

toolie

2134 posts in 2651 days


09-22-2017 06:35 PM

Having turned my attention to endgrain cutting boards, I’d like to put a name of my shop on them. Can anyone direct me to a source of small (maybe 2” X 3”) that can be attached to the side of a cutting board?

-- there's a solution to every problem.......you just have to be willing to find it.


6 replies so far

View splintergroup's profile

splintergroup

2071 posts in 1245 days


#1 posted 09-22-2017 06:51 PM

“Best” may be a simple branding iron. You can get simple text or more elaborate designs.

View Rich's profile

Rich

2962 posts in 612 days


#2 posted 09-22-2017 09:38 PM

You can get laser engravers very cheap these days. The smallest only do about 1-1/2” square, but the price for ones that can engrave larger pieces doesn’t go up that much. You can buy or cut small medallions of wood, engrave them and glue them to the side of the board.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View Madmark2's profile

Madmark2

379 posts in 611 days


#3 posted 09-23-2017 12:35 AM

$200 laser review:

View Rich's profile

Rich

2962 posts in 612 days


#4 posted 09-23-2017 12:42 AM


$200 laser review:

- Madmark2

That’s MadMark’s review. You’re MadMark2. You’ve posted that a dozen times that I know of. What gives?

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View toolie's profile

toolie

2134 posts in 2651 days


#5 posted 09-23-2017 11:51 AM

Thanks to those who’ve replied. I was looking more for a company that I could purchase small labels or signs from that said something like “xyz woodworking” rather than a way to actually engrave my projects or make the signs to go on the projects.

-- there's a solution to every problem.......you just have to be willing to find it.

View muleskinner's profile

muleskinner

896 posts in 2459 days


#6 posted 09-23-2017 01:41 PM

Anybody with a printer and a paint or graphics program could print you up labels.

-- Visualize whirled peas

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com