LumberJocks

SWEET CONTRACTORS TABLE SAW & ROUTER TABLE (SOLD)

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by newwoodbutcher posted 01-27-2011 09:05 PM 2578 views 1 time favorited 7 replies Add to Favorites Watch
View newwoodbutcher's profile

newwoodbutcher

552 posts in 2315 days


01-27-2011 09:05 PM

I upgraded to a new cabinet saw and need to get this out of my garage
A very accurate precision table saw loaded with aftermarket upgrades
Works perfectly Needs a stand/legs
Grizzly G0444 10” Table Saw 1-1/2 HP Single-Phase 110/220V cast iron table and extension wing. Original cost $400
Upgraded and new motor. Original cost $200
Woodcraft Router table wing. Original cost $179
Paralox Precision fence with 30” ripping capacity for perfect accuracy. Original cost $359
Woodcraft phenolic Router plate. Original cost $30
Dubby sled. Absolutely perfect Panel & miter cuts. Original cost $179
Zero clearance inserts to eliminate tear out . Original cost $20 each
Anti vibration kit. Original cost $35
PALS kit. Dial in perfect trunion, table & blade alignment. Original cost $20
Sorry for the less that perfect photograph

TOTAL ORIGINAL COST OVER $1,300
A great table saw $300

-- Ken


7 replies so far

View sgtq's profile

sgtq

370 posts in 2141 days


#1 posted 01-27-2011 11:24 PM

Would you be willing to ship this?

-- There is nothing wrong with America that cannot be cured by what is right with America. ~William J. Clinton

View newwoodbutcher's profile

newwoodbutcher

552 posts in 2315 days


#2 posted 01-27-2011 11:50 PM

Sorry. Too much trouble what with building a crate etc.

-- Ken

View StumpyNubs's profile

StumpyNubs

6853 posts in 2266 days


#3 posted 01-28-2011 12:08 AM

That’s a lot of “perfect” in your description… maybe you shouldn’t have upgraded…

-- Subscribe to "Stumpy Nubs Woodworking Journal"- One of the crafts' most unique publications: http://www.stumpynubs.com/

View newwoodbutcher's profile

newwoodbutcher

552 posts in 2315 days


#4 posted 01-28-2011 12:09 AM

The photo was taken before I installed a dust system although I still don’t have a set up for the planer. Yes it’s an AP 12. I like your design. It looks a bit like an aftermarket thingie I bought a few years ago and never hooked up. Although yours looks much better. Are tou selling the hoods?

-- Ken

View newwoodbutcher's profile

newwoodbutcher

552 posts in 2315 days


#5 posted 01-28-2011 12:26 AM

The descriptions are real, the saw is just not big and strong enough for the larger projects I’m doing now.
I bought the Grizzly 691 with the long fence, It also is a great saw

-- Ken

View newwoodbutcher's profile

newwoodbutcher

552 posts in 2315 days


#6 posted 01-28-2011 12:28 AM

Charliel,
It looks like a great solution. I doubt I would be interested in the plans though. I allready have more projects than I will ever complete in my lifetime.

-- Ken

View newwoodbutcher's profile

newwoodbutcher

552 posts in 2315 days


#7 posted 01-28-2011 06:00 AM

Thanks Charlie,
Iv’e printed the picture to go into my overstuffed “future Projects” drawer.

-- Ken

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com