LumberJocks

Cheese slicer hardware

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Tom posted 08-17-2017 04:48 AM 691 views 0 times favorited 9 replies Add to Favorites Watch
View Tom's profile

Tom

166 posts in 877 days


08-17-2017 04:48 AM

I want to make a few cheese slicer boards but I’m not sure where to get the hardware..I find a lot of replacement wire but I want the entire assembly. Anyone have a supplier they can share?


9 replies so far

View Rich's profile

Rich

1886 posts in 406 days


#1 posted 08-17-2017 05:20 AM

Seriously? I did a search for “cheese slicer hardware” and came up with countless hits.

Here’s one: http://www.shopsupplyhouse.com/woodprojects.htm

-- No matter how much you push the envelope, it'll still be stationery.

View KelleyCrafts's profile

KelleyCrafts

2668 posts in 556 days


#2 posted 08-17-2017 05:28 AM

I have made a few boards with the Woodcraft hardware. Works fine.

-- http://kelleycrafts.com/ - pen blanks - knife scales - turning tools

View Tom's profile

Tom

166 posts in 877 days


#3 posted 08-17-2017 05:40 AM

I’m finding lots of kits but I just want the handle/wire. Woodcraft kits include the lumber which I don’t need.

View JCamp's profile

JCamp

455 posts in 367 days


#4 posted 08-17-2017 01:17 PM

how about going to the dollar tree and buying some cheap ones. Cut the handles off and replace with your own

-- Whatsoever thy hand findeth to do, do it with all thy might

View Rich's profile

Rich

1886 posts in 406 days


#5 posted 08-17-2017 01:44 PM

There’s a new project thread this morning by a member who made cheese cutters. Maybe you could ask him for his source.

http://lumberjocks.com/projects/333601

-- No matter how much you push the envelope, it'll still be stationery.

View cebfish's profile

cebfish

150 posts in 2505 days


#6 posted 08-17-2017 06:20 PM

cheeseslicing.com

View buckbuster31's profile

buckbuster31

189 posts in 332 days


#7 posted 08-17-2017 07:39 PM

I have bought several from woodcraft without the wood. Also ebay

View oldwood's profile

oldwood

109 posts in 1061 days


#8 posted 08-18-2017 03:51 AM

Cheeseslicing.com is the one I use.

View Woodmaster1's profile

Woodmaster1

833 posts in 2404 days


#9 posted 08-18-2017 06:26 AM

+1 on cheeseslicing.com I use them for kits and they are a great company to deal with. I made jigs for the cheese slicer a tablesaw sled to cut the angle for the groove and a drill press jig for the hole. I also use a thin kerf blade so the groove is no too wide. Cutting the groove at an angle keeps the handle from hitting the table when cutting the cheese.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com