LumberJocks

Which Portable Air Compressor To Buy?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by rcflyer posted 1356 days ago 4837 views 0 times favorited 24 replies Add to Favorites Watch
View rcflyer's profile

rcflyer

9 posts in 1539 days


1356 days ago

I have been pondering over which compressor to buy, it will be used mainly for smaller projects and an occasional large one. All the reviews I have read do show pros and cons on all of them, Bostich, Rigid, CH, Porter Cable, Hitachi, Dewalt, and so on. I am looking at the Husky H1504FK $199.00 at Home Depot comes with framing nailer that I will need for my next project. Any insight on this will be appreciated. Thank you guys, and gals.


24 replies so far

View pmayer's profile

pmayer

566 posts in 1699 days


#1 posted 1356 days ago

I have the PC and it works well. Here is a review that I wrote on it: http://www.wwgoa.com/articles/product-reviews/porter-cable-pin-nailer-pancake-compressor-combo/

If the Husky tools look ok, that is a great price. I ended up getting the 6 in 1 framing nailer from HF: http://www.harborfreight.com/10-gauge-6-in-1-air-framing-nailer-98751.html

There are typically 20% off coupons floating around for HF, so the nailer comes in at $80. I am generally not a fan of HF, but for occasional use this nailer is outstanding, and allows you to shoot a number of different size and style nails, so I like the flexibility a lot.

Having said all that, I don’t do a lot of large framing projects. I recently picked up an impact driver, and if I would have had that before getting the nailer, I would not have gotten the nailer. For building an occasional stud wall, shed, etc., the impact driver is fast enough, better for toe-nailing, WAY easier to “undo” if you need to make a change, etc. If I were framing a house, no question I would get a framing nailer, but I don’t see using mine much moving forward, given my new love of impact drivers.

-- PaulMayer, http://www.vernswoodgoods.com

View Craftsman on the lake's profile

Craftsman on the lake

2383 posts in 2072 days


#2 posted 1356 days ago

I’ve got that little craftsman oil compressor. The one that costs $125 and goes on sale for $99 sometimes. It has a single elongated cylinder. I’ve had it for a few years now. It easily runs my framing and finish nailer. I’ve been using it regularly for about 4 years now with no problems.

-- The smell of wood, coffee in the cup, the wife let's me do my thing, the lake is peaceful.

View rcflyer's profile

rcflyer

9 posts in 1539 days


#3 posted 1356 days ago

That is great info guy’s never thougt about using an impact driver. I am wanting to frame the basement and would the impact be adequate?

View richgreer's profile

richgreer

4522 posts in 1708 days


#4 posted 1356 days ago

I’m very happy with my Husky compressor. It is adequate for any nailer. I use it with a finishing nailer, brad nailer and pinning (23 gauge) nailer. I don’t have (or need) a framing nailer.

I particularly like how portable the Husky is.

Advice – I found the hose that came with my Husky to be unacceptable and I almost immediately bought a better 25’ hose.

-- Rich, Cedar Rapids, IA - I'm a woodworker. I don't create beauty, I reveal it.

View reggiek's profile

reggiek

2240 posts in 1904 days


#5 posted 1356 days ago

I have the little Hitachi pancake 5 gal and it has powered everything I throw at it….It is a portable unit for job sites…so no large tank…but it puts out enough to handle a couple nailers. I used to have the PC pancake…but the one I had kept blowing out the switch and motor (I have heard that the newer ones are not of the quality standards that PC had been known for)... so I bought something else this time.

If you are going for a shop compressor…I’d get something with more storage – at least 15 gal….I use alot of air in my shop blowing off the tools, Air sanding, air drilling/nailing….the list goes on a bit sometimes. I would also recommend an oiled compressor for the lessor noise…

-- Woodworking.....My small slice of heaven!

View Mark Shymanski's profile

Mark Shymanski

5102 posts in 2347 days


#6 posted 1356 days ago

I’ve got the Porter Cable pancake compressor; actually I have two…sortof. I bought the first one to do the hardwood floor in our previous house. Worked great had it for about 5 years doing typical handy man type work. Then, about a year ago, the idiot that owns my shop left the compressor turned on and forgot about it while he went to work for over a week without ever coming back in the shop. I guess it cycled so many times that it just died, and I am not sure what exactly happened, it just won’t run for longer than a few seconds if at all. Anyway based on that great performance (except for my stupidity!) I bought a second one expecting the same kind of reliablity. Didn’t get it with this one, doing the hardwood floor in our new house the compressor will work great for a couple of hours than will do something strange, it seems to vent (somewhere, I cannot find where) the high pressure out and will do this for quite a while. It just happened to me yesterday in the shop whilst I was planning some boards ( I use the compressed air to clear out dust chips and stuff while working), it vents and basically is useless. I should have returned it while it was still in warranty but didn’t (another point toward the stupid rating:-). I will not be buying another PC pancake compressor, and from what I have been reading here I will probably invest in a compressor that is lubricated as I understand they are MUCH quieter.

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

View pmayer's profile

pmayer

566 posts in 1699 days


#7 posted 1356 days ago

“That is great info guy’s never thougt about using an impact driver. I am wanting to frame the basement and would the impact be adequate?”

I bought my framing nailer for the same purpose. I used it, but ended up using screws more than nails, and if I would have had an impact driver when I framed it, I would have used nearly all screws. It is a bit slower, but toe-nailing with a framing nailer is a pain for me, so I ended up driving screws a lot anyway. Also, I used different fasteners for tying into the bottom plate which is green treated, and it allows easy switching back and forth.

The approach that I used was to put the upper and lower plates in place, then measure each stud so that it was perfectly sized for the height of the ceiling, varying with the sloped concrete floor. This is slower, but is generally considered a better approach to framing. For this approach, screws were much easier for me, since it is all toe-nailing. The versatility, easier “undo command”, better ability to toe-nail, better fit into tight spaces, lighter weight, better control, and easier one-handed operation make it a good choice in my opinion. If you ever watch Holmes on Homes, they use impact drivers for framing all the time.

But, even if you skip the framing nailer, you will still want a compressor and a brad nailer as well as a finish nailer for trim. If you go that route, this combo is worth a look: http://www.amazon.com/Porter-PC3Pak-Finish-Stapler-Compressor/dp/B003YL4O4U/ref=sr_1_3?ie=UTF8&s=hi&qid=1292187964&sr=1-3

Also, the comment that Rich made about the included hose with his compressor applies to my PC as well. Junk.

-- PaulMayer, http://www.vernswoodgoods.com

View Jim Jakosh's profile

Jim Jakosh

11329 posts in 1739 days


#8 posted 1356 days ago

What ever you get, I would recommend an oil sump air compressor over an oil less one. The oil less ones are terribly noisy- I had one given to me and it will drive me out of the barn when I fire it up.
As far as brand goes, it depends on how much you want to spend. You can get a small (non name brand)oil sump compressor for $80. I have one I bought 5 yrs ago at Big Lots and it is still going strong. I use it for air nailers and staplers in the shop and occasionoally spraying lacquer. It has a small tank so it runs down pretty quick for spraying big jobs. It is portable and can be used on jobs away from home, too.

That Husky one with a framing nailer does not sound like a bad deal at $200. A framing nailer is easily $100.

Look at Consumer Reports on the best buy for the money. They usually have a good range of brands for comparison. Good Luck….......

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View GMman's profile

GMman

3902 posts in 2331 days


#9 posted 1356 days ago

Picture shown is an oil one works fine I also have pancake on oil less that I don’t use my shop is small and I don’t like the noise.

View TheDane's profile

TheDane

3741 posts in 2297 days


#10 posted 1356 days ago

I have been pretty happy with my Bostitch … http://lumberjocks.com/reviews/1223

—Gerry

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

View rcflyer's profile

rcflyer

9 posts in 1539 days


#11 posted 1356 days ago

I was wondering with the oil sump pumps if they have a tendancy to want to mist a small amout of oil in the air? All this advice you guy’s are giving is really helpful., thank you.

View rcflyer's profile

rcflyer

9 posts in 1539 days


#12 posted 1356 days ago

Just came across this one with an oil sump – Campbell Hausfeld Campbell Hausfeld Maxus 4 Gallon Aluminum Twinstack Compressor

Model # EX8016

View Brian's profile

Brian

79 posts in 2346 days


#13 posted 1356 days ago

Take a look at the reviews of the Makita.
I couldn’t be happier.
If you need a little more portability there’s a smaller model that’s just as good.
http://lumberjocks.com/reviews/product/893

-- http://www.brianpenning.com/

View GaryL's profile

GaryL

1074 posts in 1464 days


#14 posted 1356 days ago

If you want something for the long haul, check out Rol-Air .
I have had one for 20 yrs. and have abused it beyond belief on construction sites. Sometimes it would run for hours nonstop. Only have had to put a $17 head gasket in it about two years ago. They are not that much more than the big box compressors. No free nailer included..lol

-- Gary; Marysville, MI...Involve your children in your projects as much as possible, the return is priceless.

View Mark Shymanski's profile

Mark Shymanski

5102 posts in 2347 days


#15 posted 1356 days ago

There are de-oilers for compressed air (there are also de humidifiers) to keep the oil or water out of the spray, especially if you are spraying paint or other finishes. Usually the oil in a compressor is is not a problem because the small amount of oil into a nailer or wrench is not a bad thing (as mentioned earlier) the tools need oil anyway.

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

showing 1 through 15 of 24 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase