LumberJocks

Craftsman table saw moulding blade set

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by Muzzy17 posted 05-28-2017 03:47 AM 1401 views 0 times favorited 14 replies Add to Favorites Watch
View Muzzy17's profile

Muzzy17

46 posts in 1156 days


05-28-2017 03:47 AM

Craftsman 9 32003 table saw moulding set…used very little …looking for an interesting trade or make me a good offer… I’m into pen stuff
Could use… lathe chuck, router pantograph, good set of router stencils…biscuit jointer
Mmomoulding, planer, table saw

-- Deep rooted Southern Boy and set in my ways!


14 replies so far

View Muzzy17's profile

Muzzy17

46 posts in 1156 days


#1 posted 05-30-2017 01:46 PM

sold

-- Deep rooted Southern Boy and set in my ways!

View WhyMe's profile

WhyMe

910 posts in 1396 days


#2 posted 05-30-2017 08:48 PM

You actually had a taker for that? That one cutter molding head is about worthless. I have the three cutter head and used it may be three or four times in the first couple of years after I got it. That was at least 30 years ago and it’s still collecting dust in a drawer.

View Muzzy17's profile

Muzzy17

46 posts in 1156 days


#3 posted 06-01-2017 12:44 AM



You actually had a taker for that? That one cutter molding head is about worthless. I have the three cutter head and used it may be three or four times in the first couple of years after I got it. That was at least 30 years ago and it s still collecting dust in a drawer.

- WhyMe

Welp to each their own. Apparently the old boy I sold it to new what it was and liked it. I’ve seen them on eBay for 50.00. Mine was like new. I hope it works for him. I’d of kept it but I had no use for it.


-- Deep rooted Southern Boy and set in my ways!

View WhyMe's profile

WhyMe

910 posts in 1396 days


#4 posted 06-01-2017 08:56 PM

Yeah, $50 on ebay. That’s someone’s pipe dream.

View Jim Finn's profile

Jim Finn

2576 posts in 2757 days


#5 posted 06-01-2017 09:13 PM



You actually had a taker for that? That one cutter molding head is about worthless. I have the three cutter head and used it may be three or four times in the first couple of years after I got it. That was at least 30 years ago and it s still collecting dust in a drawer.

- WhyMe

I agree 100% I have one of these that was given to me. Still in a drawer.

-- No PHD, but I have a GED and my DD 214

View MrUnix's profile

MrUnix

5990 posts in 2034 days


#6 posted 06-01-2017 09:18 PM

I keep getting these things as freebies.. one (Craftsman 3 knife version) was thrown in along with a bunch of other blades and stuff when I bought a RAS, and another one (Delta 3 knife) even came with an old lathe I bought! Both, despite being decades old, have never been used, still in their original boxes, and basically look brand new :)

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View Kazooman's profile (online now)

Kazooman

867 posts in 1788 days


#7 posted 06-01-2017 09:33 PM

Agreed. Actually, who needs a ton of molding with those profiles? The one blade on the table saw design is not the best way to create these profiles. If you need a ton then buy a shaper. For smaller amounts a combination of the table saw and a router table will probably provide better results. I wonder how the average Joe is going to sharpen those profiles when they get dull. You can touch them up for a while by flattening the back, but eventually…...

View 01ntrain's profile

01ntrain

210 posts in 905 days


#8 posted 06-01-2017 11:25 PM

I used a 3-cutter set that I had, years ago for door trim (the fluted knife). It worked OK, very little tearout. But, it was an exercise in chatter. A pretty scary way to create trim.

I can’t imagine how the 1-cutter set would be like.

View Nubsnstubs's profile

Nubsnstubs

1207 posts in 1565 days


#9 posted 06-01-2017 11:37 PM

It sounds like the general consensus is you should email the guy that bought it, and offer a refund and thank him for helping you clear up shop space. ... hehehe .......... Jerry (in Tucson)

-- Jerry (in Tucson) www.woodturnerstools.com

View Muzzy17's profile

Muzzy17

46 posts in 1156 days


#10 posted 06-01-2017 11:53 PM



Yeah, $50 on ebay. That s someone s pipe dream.

- WhyMe


Yeah I thought $50.00 was a bit much so I priced mine at $30.00 it sold over night. Gotta love the internet.

-- Deep rooted Southern Boy and set in my ways!

View WhyMe's profile

WhyMe

910 posts in 1396 days


#11 posted 06-02-2017 02:21 AM

To get $30 was good. Was it a local sale and pickup? Or did you have to cover shipping in that price?

View Muzzy17's profile

Muzzy17

46 posts in 1156 days


#12 posted 06-04-2017 09:05 AM

Face to face dropped it off on way home from work. Couldn’t have worked out better.

-- Deep rooted Southern Boy and set in my ways!

View Gilley23's profile

Gilley23

381 posts in 217 days


#13 posted 06-04-2017 11:12 AM

You always so cheerful or is this just a special thread for you?


Yeah, $50 on ebay. That s someone s pipe dream.

- WhyMe


View WhyMe's profile

WhyMe

910 posts in 1396 days


#14 posted 06-04-2017 01:59 PM


You always so cheerful or is this just a special thread for you?

Yeah, $50 on ebay. That s someone s pipe dream.
- WhyMe

- Gilley23

Pardon, are you having a particular problem with my discussion with Muzzy17? Oh, I get it, you’re an online psychology analyst.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com