LumberJocks Woodworking Forum banner

need some chair spindles

Tags
turning
2K views 3 replies 3 participants last post by  Jim Jakosh 
#1 · (Edited by Moderator)
I'm rebuilding and antique rocker and need to replace some missing spindles. I have a spindle I can send if someone has a duplicator. Anyone got a hookup?
 
#3 ·
Thanks Cher. I did receive a couple saying they would give it a try but were beginners in the spindle turning area. Looks like most of the wood turner here do bowls, vases and pens. I was fianally able to get connected wityh a guy in Iowa who turns spindle often. Thanks agin for your reply.

Blessings,
SDJ
 
#4 ·
Hi SDJ. I might be able to help you. I have been asked to turn some from a a guy I met at the craft show on Saturday. I try anything on the lathe and have made a few spindles as long as they are not too small in diameter. I tend to blow them up. Can you send me a picture of what you need and the quantity and wood they have to be made of? My E mail is jcj7815@att.net.

If the contact in Iowa does not pan out, send me a note with pictures…............Jim
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top